11-23. What is the resultant wall force for an infinitely long line load (0.3 m wide) loaded with q = 50kN/m if the strip is located 1.2 m from the wall (DTWAL) for a soil with u = 0.3 and 0.6?11-24. What is the resultant wall force for an infinitely long strip load of width = 1.0 m with a pressureintensity of 100 kPa, located 1.5 m from the wall (DTWAL)?%3!%3D

Resultant wall force: Horizontal Earth Pressure Acting on Retaining Wall. The fundamental motivation…

11-23. What is the resultant wall force for an infinitely long line load (0.3 m wide) loaded with q = 50 kN/m if the strip is located 1.2 m from the wall (DTWAL) for a soil with pu = 0.3 and 0.6? 11-24. What is the resultant wall force for an infinitely long strip load of width = 1.0 m with a pressure intensity of 100 kPa, located 1.5 m from the wall (DTWAL)? %3D

11-23. What is the resultant wall force for an infinitely long line load (0.3 m wide) loaded with q = 50 kN/m if the strip is located 1.2 m from the wall (DTWAL) for a soil with pu = 0.3 and 0.6? 11-24. What is the resultant wall force for an infinitely long strip load of width = 1.0 m with a pressure intensity of 100 kPa, located 1.5 m from the wall (DTWAL)? %3D

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter15: Braced Cuts

Section: Chapter Questions

Problem 15.6P

See similar textbooks

Similar questions

Given: 1. Structural Component: Beam 300 mm x 400 mm Column 400 mm x 400 mm Slab thickness 110 mm 2. Dead Load: Super Imposed dead load = 4.5 KPa (including slab weight) CHB = 3.11 KPa 3. Seismic Parameter: Soil Profile - Sb Closest distance to the source - 10 km Ductility Coefficient R = 8.0 Seismic Zone Z=0.40 Ct = 0.0731 A. Compute the DESIGN BASE SHEAR (V = Cv*I*W /R*T). B. Compute the Minimum DESIGN BASE SHEAR (V =0.11Ca*I*W).
Given: 1. Structural Component: Beam 300 mm x 400 mm Column 400 mm x 400 mm Slab thickness 110 mm 2. Dead Load: Super Imposed dead load = 4.5 KPa (including slab weight) CHB = 3.11 KPa 3. Seismic Parameter: Soil Profile - Sb Closest distance to the source - 10 km Ductility Coefficient R = 8.0 Seismic Zone Z=0.40 Ct = 0.0731 A. Compute TOTAL LATERAL FORCES in the 2nd floor? B. Compute LATERAL FORCES in the 3rd floor?
1. The bar has a cross-sectional area of 400*10-6 m2. If it is subjected to a uniform axial distributed loading along its length and to two concentrated loads, determine the average normal stress in the bar as a function of x, for 0.5 m < x≤ 1.25 m. 0.5 m w = 8 kN/m -6 kN -0.75 m 3 kN
A 60 cm CI main pipe leads from a reservoir whose water surface is at Elev. 1590 m. Below the ground surface level, the main pipe is horizontally positioned at Elev. 1410 m. Assuming static condition, what is the stress in the pipewall if the wall thickness is 12.50 mm and the soil pressure is 520 kPa?
Compute the increase in the stress at point A when two line loads of value 90 kN/m and 325 kN/m act on the soil surface at a distance of 4 m between them. Also, the point A is 3 m below the surface and at horizontal distance of 2.5 m from the second line load. Line load = 41 Line load => 42 Ar ←32—
A 60 cm Cl main pipe leads from a reservoir whose water surface is at Elev. 1590 m. Below the ground surface level, the main pipe is horizontally positioned at Elev. 1410 m. Assuming static condition, what is the stress in the pipewall if the wall thickness is 12.50 mm and the soil pressure is 520 kPa? a. 18.2 MPa O b. 20.5 MPa O . 28.7 MPa O d. 32.6 MPa
Compute the increase in the stress at point A when two line loads of value 90 kN/m and 325 kN/m act on the soil surface at a distance of 4 m between them. Also, the point A is 3 m below the surface and at horizontal distance of 2.5 m from the second line load.
A 60 cm CI main pipe leads from a reservoir whose water surface is at Elev. 1590 m. Below the ground surface level, the main pipe is horizontally positioned at Elev. 1410 m. Assuming static condition, what is the stress in the pipewall if the wall thickness is 12.50 mm and the soil pressure is 520 kPa? (With Free Body Diagram)
A point load of 870kN is applied to a soil. At a depth of 2.5m directly below the applied load, determine the vertical stress in kPa. [2 marks] At 3.5m to the left of the 870kN load in Q1.9 above, a 640kN point load is applied, together with a 560kN point load 4.5m to the right of the 870kN load in Q1.9 above. Determine the vertical stress 2.5m directly below the 870kN load. [3 marks]
A 3 m x 4 m rectangular area carrying a uniform load of 240 kPa. is applied to the ground surface. Comnpute the vertical stress (the vertical unit pressure) inerement due to their load at a depth of 6 m. below the ground surface using the approximate method.
6. A concentrated load of 1500 KN is applied at the ground surface at point A whose coordinate is (0,0,0). a. Determine the vertical stress, in KN at a point 2.5 m directly below A. b. Determine the vertical stress, in KN at a point whose coordinate is (1.5, 0, 2.5). C. Determine the vertical stress, in KN at a point whose coordinate is (1.5, 2, 2.5).
Q-1: For the following soil system determine the effective stress and pore-water pressure at the point “A" when i) water table is at ground surface ii) water table is 1m below the ground surface (consider ya = 16 kN/m³) 1 m Ysat = 18 kN/m 5 m 5 m Ysat= 18 kN/m Yw = 10 kN/m A Y = 10 kN/m³ (i) (ii)