14-97. A pan of negligible mass is attached to two identical springs of stiffness k = 250 N/m. If a 10-kg box is dropped from a height of 0.5 m above the pan, determine the maximum vertical displacement d. Initially each spring has a tension of 50 N. 1m 0.5 m k = 250 N/m k = 250 N/m www

14-97. A pan of negligible mass is attached to two identical springs of stiffness k = 250 N/m. If a 10-kg box is dropped from a height of 0.5 m above the pan, determine the maximum vertical displacement d. Initially each spring has a tension of 50 N. 1m 0.5 m k = 250 N/m k = 250 N/m www

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter4: Coplanar Equilibrium Analysis

Section: Chapter Questions

Problem 4.21P: The 1200-lb homogeneous block is placed on rollers and pushed up the 10 incline at constant speed....

See similar textbooks

Related questions

Q: *14-16. A small box of mass m is given a speed of » = Vigr at the top of the smooth half cylinder.…

A: Draw the free-body diagram of the block.

Q: 14-69. The 5-kg collar has a velocity of 5 m/s to the right when it is at A. It then travels along…

Q: 14-95. The cylinder has a mass of 20 kg and is released from rest when h = 0. Determine its speed…

A: Write the expression of the potential energy of the mass.

Q: 14-25. The 5-lb cylinder is falling from A with a speed VA = 10 ft/s onto the platform. Determine…

A: Given Data: The weight of the cylinder falling is W = 5 lb. The speed of the cylinder is vA = 10…

Q: 18-58. The slender 6-kg bar AB is horizontal and at rest and the spring is unstretched. Determine…

A: Given , mass of slender bar AB , m=6 kg stiffness of the spring , k=? Initial…

Q: *14-96. If the 20-kg cylinder is released from rest at h = 0, determine the required stiffness k of…

A: Given :-mass of cylinder , m=20 kgh1=0 , h2=0.5 munstretched length=1mWrite the conservation of…

Q: 13-57. The collar A, having a mass of 0.75 kg, is attached to a spring having a stiffness of k = 200…

A: The mass of the collar is m=0.75 kg. The stiffness of the spring k=200 N/m. Determine the constant…

Q: 14-73. The roller coaster car has a mass of 700 kg, including its passenger. If it is released from…

A: Draw the free-body diagram of the roller coaster car.

Q: 18-55. The slender 15-kg bar is initially at rest and standing in the vertical position when the…

A: The instantaneous center would be at point C and the final position when the end A strikes D will be…

Q: *13-84. The 2-lb block is released from rest at A and slides down along the smooth cylindrical…

A: Consider Fs as the spring force, m as the mass of the block, at to be the tangential acceleration…

Q: If the 7.25-kg block is moving with an initial speed of 6.5m/s and the coefficient of kinetic…

Q: 14-73. The roller coaster car has a mass of 700 kg. including its passenger. If it is released from…

A: Find the minimum height of the hill and normal reaction at B and C.

Q: R14-6. The 50-lb load is hoisted by the pulley system and motor M. If the motor exerts a constant…

A: Given Load = 50 lb Motor force = 30 lb Distance of lift = 10 ft Motor efficiency = 0.76 To find…

Q: The 7-kg smooth cylinder is supported by the spring having a stiffness of kab = 120 N/m. Determine…

Q: P14-4. Determine the potential energy in the spring that has an unstretched length of 4 m. k = 10…

A: Given Data: The unstretched length of the spring is Li = 4 m. The spring constant is k = 10 N/m.…

Q: 14-79. A 2-lb block rests on the smooth semicylindrical surface at A. An elastic cord having a…

A: Given data as per question Weight of the block = 2 lb Stiffness = 2 lb/ft Angle = 450

Q: 17-50. If the cart's mass is 30 kg, determine the horizontal force P that should be applied to the…

A: Given Data: The mass of the cart is: M=30 kg The mass of rod BC is: m=15 kg

Q: The 5-kg smooth cylinder is supported by the spring having a stiffness of kAR = 124 N/m. Determine…

Q: Specifically a dynamics problem. Question in pic below.

Q: 14-42. The jeep has a weight of 2500 lb and an engine which transmits a power of 100 hp to all the…

A: Given data as per the question weight of jeep = 2500 lb power to be transmitted = 100 hp velocity…

Q: F13-3. A spring of stiffness k = 500 N/m is mounted against the 10-kg block. If the block is…

A: Given Data: Stiffness of spring is k = 500 N/m. Mass of block is m = 500 kg. Force on block is F =…

A: Mass of train car M=5000 kg velocity vi=4 m/s Maximum deflection in spring x=0.2 m

Q: 14-78. The spring has a stiffness k = 200 N/m and an unstretched length of 0.5 m. If it is attached…

A: Given data The spring has a stiffness k = 200 N/m unstretched length = 0.5 m. If it is attached…

Q: R14-6. The 50-lb load is hoisted by the pulley system and motor M. If the motor exerts a constant…

Q: F14-1. The spring is placed between the wall and the 10-kg block. If the block is subjected to a…

A: Force, F= 500 N Stiffness of the spring, k= 500 N/m Initial displacement, s1= 0 m Final…

Q: The system is at rest with the spring unstretched when 0 = 0. The 4 kg particle is then given a…

A: Given:-θ=0m=4kgθ=36 degreeθ=20 degreeb=0.4k=110N/mTo find:-ktotal energy speed . 0

Q: 14-25. The 5-lb cylinder is falling from A with a speed vA = 10 ft/s onto the platform. Determine…

Q: 14-70. The ball has a weight of 15 lb and is fixed to a rod having a negligible mass. If it is…

Q: 14-67. The 30-lb block A is placed on top of two nested springs B and C and then pushed down to the…

A: Given Data: The weight of the block is W = 30 lb. The spring constant of the spring C is kC = 100…

Q: The 2 kg block is released from rest at A and slides down the smooth parabolic surface. Determine…

A: Write the given data with suitable variables.

Q: Specifically a dynamics problem. Question in pic below.

A: Given: The mass of tank car, m = 20 Mg The velocity of tank in right direction, v = 0.75 m/s Concept…

Q: 14-34. The spring bumper is used to arrest the motion of the 4-lb block, which is sliding toward it…

A: Given Data: The weight of the block is w = 4 lb. The velocity of the block is v = 9 ft/s. The…

Q: Q The 10-kg block A is released from its rest position and slid down the smooth plane. Determine the…

Q: Question in pic below. Specifically a dynamics problem.

A: Given data as per question Mass of cylinder = 5 lb Speed = 10 ft/s K of spring = 400 lb/ft…

Q: 14-78. The spring has a stiffness k = 200 N/m and an unstretched length of 0.5 m. If it is attached…

A: Given data: The stiffness of the spring is k = 200 N/m. The unstretched length of the spring is LUS…

Q: 14-17. The collar has a mass M and is supported on the rod having a coefficient of kinetic friction…

Q: 14-65. The block has a mass of 150 kg and rests on a surface for which the coefficients of static…

A: m = 150 kg μs = 0.5μk = 0.4F = 60 t2 N Free body Diagram of Block A is shown in figure,

Q: The force P is applied to the 200-kg block A which rests atop the 100-kg crate. The system is at…

Q: 14-23. The 8-kg block is moving with an initial speed of 5 m/s. If the coefficient of kinetic…

A: Given Data The mass of the block, 8Kg Initial speed, 5m/s The coefficient of kinetic friction…

Q: 18-22. If the 50-lb bucket, C, is released from rest, determine its velocity after it has fallen a…

A: The weight of the bucket is c=50 lb. The mass of windlass is 30 lb. The weight of each spoke is w=2…

Q: 10 km/h в 20 km/h k - 3 MN/m Prob. 15–51

Q: *18-64. The door is made from one piece, whose ends move along the horizontal and vertical tracks.…

A: Given: θ=0° m= 180 lb l= 8 ft The door is released from this position To determine: the speed

Q: Problem 14-70 Determine the smallest amount the spring at B must be compressed against the block…

Q: This is a dynamics question. The answer is 481 mm.

A: The free body diagram of both the cars A and B is shown below:

Q: 22–30. Determine the differential equation of motion of the 3-kg block when it is displaced slightly…

A: Apply the law of the conservation of energy T+V= constant

Q: 14-51. The 1000-lb elevator is hoisted by the pulley system and motor M. If the motor exerts a…

A: Apply condition of equilibrium ∑Fy=03(500)-1000=100032.2×a a=16.1 ft/s2 When the load has been…

Q: 13-77. The cylindrical plug has a weight of 2 lb and it is free to move within the confines of the…

A: givenWeight of cylinder W=2lbstiffness k=14lb/ftdistance d=0.5ft plug is travelling with constant…

Q: -1.5 m 3 m/s k= 100 N/m B Prob. 14-76

Q: Question in pic below. Specifically a dynamics problem.

A: Given data as per question Mass of the ball = 15 lb Length of the rod = 3 ft

Q: 15-47. The 30-Mg freight car A and 15-Mg freight car B are moving towards each other with the…

Question

14-97. A pan of negligible mass is attached to two identical
springs of stiffness k = 250 N/m. If a 10-kg box is dropped
from a height of 0.5 m above the pan, determine the
maximum vertical displacement d. Initially each spring has
a tension of 50 N.
1m
0.5 m
k = 250 N/m
k = 250 N/m
www

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

The 1200-lb homogeneous block is placed on rollers and pushed up the 10 incline at constant speed. Determine the force P and the roller reactions at A and B.
The homogeneous 240-lb bar is supported by a rough horizontal surface at A, a smooth vertical surface at B, and the cable BC. Draw the FBD of the bar and count the unknowns.
The weightless bars AB and CE, together with the 5-lb weight BE, form a parallelogram linkage. The ideal spring attached to D has a free length of 2 in. and a stiffness of 7.5 lb/in. Find the two equilibrium positions that are in the range 0/2, and determine their stability. Neglect the weight of slider F.
2. Find the horizontal force P to start the motion of any part of the system of three blocks resting upon one another as shown. The weight of the blocks are W-300 KN, Ws= 100 KN and Wc =200 KN. Between A and B μ=0.30, between C and B, μ =0.20 and between C and the ground, p=0.10. 1 sni brod nog 02.0-4 B C 05.0-4 Solution: tamos quoy worla bre sosia asquar 005 300 en of jells400 N₁-300 F3 N-300- N₂=300 Assuming B and C will not move. F₁ = 300 (0.30) F₁ = 90 kN ne à bns A zelboß 1 P = 90 kN es ensla berb hebnu 02.0- y elin 05.0= q V in Celpris orllanimetsa MX 008 Assuming C will not move: al 1st F2=400 (0.20) = 80 kN OTE Bm ribirte F₂ vica Assuming the three blocks move: F3 = 0.10 (600) F3 = 60 kN P=60 KN Least force is 60 kN.
The rod shown, released from rests in this position (0 = 0) and the spring is unstretched. If the body will stopped momently at e = 49 degrees, Find the work done by slender weight in joules. Given L=1.3 m, mass=20 Kg wwww B k 3L/4 L/4 Answer:
Determine the stretch in each spring for for equilibrium of the 1.8-kg block. The springs are shown in the equilibrium position. (Figure 1) No elements selected 3m 4 m 3 m kAC = 20 N/m igure kan = 30 N/m www 1 of 1 3 m 4 m kAD- 40 N/m 3 m kAc = 20 N/m kAn- 30 N/m www kAD- 40 N/m Select the elements from the list and add them to the canvas setting the appropriate attributes.
touchO 101:53 MENG250 - Practice Ass.. •3-41. A continuous cable of total length 4 m is wrapped around the small pulleys at A, B, C, and D. If each spring is stretched 300 mm, determine the mass m of each block. Neglect the weight of the pulleys and cords. The springs are unstretched when d = 2 m. - 500 N/m D k - 500 N/m 8 wind O
Each spring has an unstretched length of 2 mm and a stiffness of k = 350 N/m. Determine the stretch in OA spring required to hold the 25-kg crate in the equilibrium position shown. Determine the stretch in OB spring required to hold the 25-kg crate in the equilibrium position shown.
A two degrees of freedom mass spring system is fixed at one end, where independent masses can move only in the vertical direction. Considering the system as finite elements, determine the vertical displacement for each mass. Also draw the free body diagram of this system. Use 'X' KN/m as the stiffness value for all the springs and 'Y' Kg as the value for all masses. Where, 'X'= (63) 'Y'= (93)
Q3 - The uniform bar OC of length L and mass ( m ) pivots freely about a horizontal axis through O. If the spring of modulus k is unstretched when C is coincident with A, determine the tension T required to hold the bar in the position shown. The diameter of the small pulley at D is negligible. T L/2 45° 30° B L/2 mg A www
Q3 - The uniform bar OC of length L and mass (m ) pivots freely about a horizontal axis through O. If the spring of modulus k is unstretched when C is coincident with A, determine the tension T required to hold the bar in the position shown. The diameter of the small pulley at D| is negligible. T D L/2 45° B 30 L/2 mg А wwww
Given the figure shown below, what is the mass of block B on the smooth incline if the system is in static equilibrium? A rope runs from block B up around the frictionless pulley at A down to a 10 kg counterweight. A 1 m В 1 m 10 kg 45°