2-The Magneto motive force of a steel-ring of 25 cm mean diameter If it is wound uniformly with 700 turns of wire carrying a current of 2 amp. a-1500 AT b-2000 AT c-1800 AT d-1400 AT 3-The self-inductance coefficient of a d.c. electromagnet- whose field winding is wound with 960 turns and has resistance of 50 2 when the exciting voltages is 230 V and the magnetic flux linking the coil is 0.005 Wb. a-10.43mH b-10.43H c-1.043H d-0.1043 H 4- An iron rod, 2 cm in diameter and 20 cm long is bent into a closed ring and is wound with 3000 turns of wire. It is found that when a current of 0.5 A is passed through this coil, the flux density in the coil is 0.5 Wb/m2. The magnetic field intensity of it ---- a-300AT/m b-30AT/m c-3000AT/m d-300AT/cm

2-The Magneto motive force of a steel-ring of 25 cm mean diameter If it is wound uniformly with 700 turns of wire carrying a current of 2 amp. a-1500 AT b-2000 AT c-1800 AT d-1400 AT 3-The self-inductance coefficient of a d.c. electromagnet- whose field winding is wound with 960 turns and has resistance of 50 2 when the exciting voltages is 230 V and the magnetic flux linking the coil is 0.005 Wb. a-10.43mH b-10.43H c-1.043H d-0.1043 H 4- An iron rod, 2 cm in diameter and 20 cm long is bent into a closed ring and is wound with 3000 turns of wire. It is found that when a current of 0.5 A is passed through this coil, the flux density in the coil is 0.5 Wb/m2. The magnetic field intensity of it ---- a-300AT/m b-30AT/m c-3000AT/m d-300AT/cm

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

7. A coil having a resistance of 20 ohms and an inductance of 0.75 henry is connected in series with a 30-ohm resistor and to a 120-volt d-c source. A switch across the series resistor is then closed, and the circuit is assumed to be in a steady-state condition. At the instant the switch is opened, what will be the rate of current change and the power delivered by the magnetic field.
2. A C-core with a gap of 0.0001m has a coil number of 100 and a current of 10mA. First find the reluctance of the core given that the Iron core has a negligible reluctance and only the air reluctance contributes to the majority of reluctance. The core has a cross sectional area of 2cm². Next find the flux flowing thru the C-core.
A triac is equivalent to two SCRs ………….. a. In series b. In anti-parallel c. series-parallel d. In parallel
A ferromagnetic core is shown in Figure PI-2. The depth of the core is 5 cm. The other dimensions of the core are as shown in the figure. Find the value of the current that will produce a flux of 0.005 Wb. With this current, what is the flux density at the top of the core? What is the flux density at the right side of the core? Assume that the relative permeability of the core is 1000. -10 cm- - 20 cm- 15 cm 400 turns 15 cm 15 cm Core depth 5 cm
Consider a ferromagnetic ring (nucleus) that has a mean circumference of 40 cm, 300coiled copper turns and a sectional area of 5 cm2. A current of 2 is appliedA to winding, producing a flux of 1.5 mWb.Determine the permeability of the core material.Determine the relative permeability of the core material.If the ferromagnetic ring has an air gap of 2 mm. Find the required MMFso that the flux density in the gap is 0.5 T.
A ferromagnetic core in the shape of a doughnut has a cross-sectional area of 0.11 m2 and an average length of 1.4 m. The permeabil ity of the core is 1.206 × 10-3 Wb/A-t. m. Determine the reluctance of the magnetic circuit
A magnetic circuit has a length of 100 cm and cross-sectional area of 5 square cm. The total flux is 10 x 10 webers. The coil has 100 turns and current of 4 amperes. What is the magnetic strength? a. 500 AT/m b. 400 AT/m c. 350 AT/m d. 450 AT/m
The magnetic structure of Figure Q7 1 has a rerromagnetic core that can be treated as infinitely permeable Air-gap fringing Is negligible Let N= 10 turns, A=02 m and gap length is 0 = 5 x 10 m. The coil is excited by a sinusoidal voltage source that establishes a flux given by p(t) = 0.25stn20t Wb. The resistance of the coil can be neglected Determine the supply voltage, ), the current, (t) and the inductance of the coil, L. %3D Area, A ŁAir Vst) Figure Q7.1. Solutions insert your solutions in the spaces provided below. Give your numerical values to the nearest whole number unless where stated otherwise. Veft) = Volts t) = A. L= H (give your answer correct to 3 decimal places).
A coil that con sists of 450 windings is wound aroundabakelite ring. The mean diameter of the ring is 100 mm and the diameter of the bakelite core is 20 mm. The currentthrough the coil is 3 A. Determine: 1.1 a) the field stren gth b) the flux den sity c) the total flux A ringhas two halves. The onehalf is made from Cast iron, while the other is made from Cast steel. The two halves are held 1 mm apart with the aid of a paper disc. The cross-section al area and mean circumference of the ringis 345 mm? and0.6 m respectively. Therelative permeability of cast iron is 2400, while that of cast steel is 600. The ring has a coil with 200 win dings. The currentflow through the coil causes a flux den sity of 0.48T. 1.2 Calculate the: a) mmi b) currentflow Ignore the effects of fringing andleakage.
We want to investigate how the field strength will be with air as dielectric and with steatite. A plate capacitor is placed in a 24 kV network between phase and ground. The relative permittivity of air is &=1 and for steatite &-6. The plate capacitor has area = 1m². The distance between the electrodes is 2 mm. Ep = 8.854-10-12 F/m A=1m² d=2mm a) Calculate the maximum field strength in the plate capacitor. (Answer: 9.8kV/mm) b) What is the capacitance of the capacitor if we use steatite? (Answer: C = 26.6nF)
Q9 / What are the function of brushes , pole and commutator in DC machine
A magnetic ring has reluctance of 1.675 × 10⁰ AT weber. The flux to be produced by the coil is 800 x 10 webers, then the AT required for the m.m.f. will be