43. A two-stream annular fuel rod includes inner and outer cladding. Use the fol- lowing data and determine equation for temperature as a function of radius for the inner clad, fuel, and the outer clad regions. Also find the maximum temperature and its location. Data: R1 = 0.25 in, R2 = 0.27 in, R3 = 0.55 in, R4 = 0.58 in, ģ´ = 11 kW/ft, kf = 3.5 W/m-C, kc = 11 W/m-C, T; = 350 C, T, = 300 C, h; = 6,000 W/m²-C, h, = 4500 W/m²-C. [Ans.: r(Tmax)= 0.39 in, Tmax = 546 C, T = 182lnr + 1330, Tp = -5.543E6,² +1090lnr + 6120, Tco = -3321nr -1040 where r is in meter and T in degrees Centi- %3D %3D

43. A two-stream annular fuel rod includes inner and outer cladding. Use the fol- lowing data and determine equation for temperature as a function of radius for the inner clad, fuel, and the outer clad regions. Also find the maximum temperature and its location. Data: R1 = 0.25 in, R2 = 0.27 in, R3 = 0.55 in, R4 = 0.58 in, ģ´ = 11 kW/ft, kf = 3.5 W/m-C, kc = 11 W/m-C, T; = 350 C, T, = 300 C, h; = 6,000 W/m²-C, h, = 4500 W/m²-C. [Ans.: r(Tmax)= 0.39 in, Tmax = 546 C, T = 182lnr + 1330, Tp = -5.543E6,² +1090lnr + 6120, Tco = -3321nr -1040 where r is in meter and T in degrees Centi- %3D %3D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The heating value of the a dry fuel is 18 MJ/kg. a) Calculate the effective heating value of a fuel with 40% moisture and no flue gas condensation. b) Calculate the heating value of a fuel with 40% moisture and flue gas condensation Evaporation enthalpy H=2257 kJ/kg. Cp=4,2 ( kJ/kg,K) The heating value of a moist fuel is given by this formula: H=H0*(1-f)-f*2,6 (MJ/kg), H0=heating value of dry fuel, f=fraction of water.
a. A winter fuel has10% and 90% evaporation temperatures of 122°F and 360°F with midpoint boiling temperature of 190°F. Find its drivability index, DI. b. A fuel blend has a density of 700 kg/m3 and a midpoint boiling temperature of 90◦C. What is its cetane index?
Methane fuel is burned with air in a boiler system. Temperature and pressure values of combustion environment of air and fuel of the inlet are 25C and latm respectively, the thermal efficiency of the boiler is 60%. Calculate the flue gas temperature value of the boiler with given. Given: METHANEAID = 50000 kJ / kg Excess air coefficient = 1.4 All reacts and products are perfect gases.
Problem No.1 Using PSYCHROMETRIC CHART, find the unknown properties of the following conditions below: a.) RH= 75% and tdry = 30oC b.) h= 95 kJ/kg and RH= 70% c.) tdry = 30oC and twet = 30oC d.) w=0.015 and RH=55% e.) Pair=97.6kPa, P=100 kPa and tdry = 35oC Where: RH= relative humidity tdry=dry bulb temperature twet =wet bulb temperature h= enthalpy Pair= dry air pressure w = humidity ratio
External Problem: Fuel, air and combustion Gasoline having a chemical formula CgH17 is burned in an engine at a fuel-air equivalence ratio = 1.19 and a temperature of 1000K. a) Write the stoichiometric combustion equation of the fuel; b) Write the reaction equation corresponding to the given fuel-air equivalence ratio.
Q) A single-cylinder two-stroke SI engine has 8 cm diameter bore and 10 cm stroke. The compression ratio is 8. The cxhaust port opcns 60° beforc BDC and closcs 60° after BDC. The air/fucl ratio is 15.1. The temperature of the mixture cntering into the cngine is 300 K and the pressure in the cylinder at the time of closing the exhaust port is 1.05 bar. Take R for the mixture = 290 J/(kg K). Air supplied to the engine is 150 kg/h. The speed of the engine is 4000 rpm, Considering the effective stroke, calculate the scavenging ratio, the scavenging efficiency and the trapping efliciency.
2 A six-cylinder, four-stroke, direct-injection oil engine is to deliver 120 kW at 1600 rpm. The fuel to be used has a calorific value of 43 M.J/kg and its percentage composition by mass is carbon 86.0%, hydrogen 13.0%, non combustibles 0%. The absolute volumetric efficiency is assumed to 80%, the indicated thermal efficiency 40% and the mechan- ical efficiency 80%. The air consumption to be required for theoretically correct e 1100 in excess of that (i) Estimate the volumetric comp Jlf of dry exhaust gas (ii) Determine the bore and stroke of t he engine, taking a stroke to bore ratio as 1.5. Assume the volume of 1 kg of air at the given conditions as 0.77 m3. Oxygen in air is 23% by mass and 21% by volume.
Part 1:Design a three-component gasoline blend. Specify the boiling temperature of your blend.Additionally, determine the Research Octane Number (RON), Motor Octane Number (MON), andAnti-Knock Index (AKI) for this blend. Lastly, evaluate whether this fuel is sensitive to combustionchamber geometry.Part 2:Hydrogen is utilized as a fuel in an experimental engine and is combusted with stoichiometricoxygen. Assume the reactants initiate at a temperature of 25°C. Write the balanced chemicalreaction equation for this combustion.Perform the following calculations:(a) Determine the fuel-air (fuel-oxygen) ratio.(b) Calculate the equivalence ratio for the combustion process.
For a 4-stroke, SI engine with the following parameters: crank angle degree (CAdeg ATDC), 20 start of combustion (soc) crank angle degree: -10 CAdeg ATDC burn duration: 40 CAdeg Calculate the mass fraction burned (between 0 to 1) based on the Wiebe function. (assume a=5 and m=2) Give your answer to 2 decimal places.
A substance has a melting point of 20°C and a boiling point is 150°C. The latent heat of fusion of 3.5 x 104 J/kg and the latent heat.of vaporization of 7.0 x 10* J/kg. The specific heat for the solid phases is 600 J/(kg. °C). The specific heat for the liquid phase is 1050 J/(kg.°C) and the specific heat for the gas phase is 400 J/(kg.°C). The specific heat capacity for water is 4190 J/(kg.°C). Water has a melting point of 0°C and a boiling point is 100°C. What mass of water initially at a temperature of 70°C was added to 0.50 kg of the substance, at a temperature of 16°C, if the final temperature is measured to be 30°C.. Assume no heat was lost to the surroundings or the container. Give the mass in kg stated to 3 decimal places.
Methane fuel is burned with air in a boiler system (open system). For this system, the HFK value for the air supplied to the combustion environment is 1.4. If the temperature and pressure of the air and fuel entering the combustion environment is 25 ° C and 1atm, we calculate the flue gas temperature value of the boiler, assuming that the boiler's thermal efficiency is 60%. All reacting species and reaction products are perfect gases. There is no water condensation in the products. METANAID = 50000 kJ / kg HFK = Air excess coefficient All reacting species and reaction products are excellent gas. Products "no water condensation.
Completely solve and provide the diagram. Box the final answer. Write legibly 4. A single effect water evaporator operating at 125 kPa abs vapor pressure. Motive steam is available for evaporation at 1.0 MPa with 90% vapor content, what is the mean temperature difference?