A 0.3674 g powdered milk sample was analyzed for calcium by igniting in a crucible at 1000°C, the ash dissolved in dilute HCI, and the solution buffered to pH 10. A titration with an EDTA solution required 15.62 mL of EDTA. The EDTA was standardized by titrating a 10.00 mL aliquot of a solution containing 500.0 mg Zn/L. This titration required 9.81 mL of EDTA. What is the mg% of calcium in the powdered milk?

A 0.3674 g powdered milk sample was analyzed for calcium by igniting in a crucible at 1000°C, the ash dissolved in dilute HCI, and the solution buffered to pH 10. A titration with an EDTA solution required 15.62 mL of EDTA. The EDTA was standardized by titrating a 10.00 mL aliquot of a solution containing 500.0 mg Zn/L. This titration required 9.81 mL of EDTA. What is the mg% of calcium in the powdered milk?

Chemistry & Chemical Reactivity

10th Edition

ISBN:9781337399074

Author:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Publisher:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Chapter4: Stoichiometry: Quantitative Information About Chemical Reactions

Section4.9: Spectrophotometry

Problem 2.1ACP: Excess KI is added to a 100.0-mL sample of a soft drink that had been contaminated with bleach,...

See similar textbooks

Similar questions

The grid has six lettered boxes, each of which contains an item that may be used to answer the questions that follow. Items may be used more than once and there may be more than one correct item in response to a question. Place the letter(s) of the correct selection(s) on the appropriate line. Could dissolve Zn(OH)2 _____________ Could be used to prepare a buffer from __________ Halfway to the equivalence point in the titration of a weak, monoprotic acid with strong base ________ SO2-related atmospheric phenomenon __________ Species formed by a Lewis acid-base reaction ________ General condition required for precipitation to occur ________ [conj. base] = [conj. acid] in a buffer ___________
A sample containing 0.200 g primary standard calcium carbonate (CaCO3, FW-100.09 g/mol) was dissolved in HCI and diluted to 50 mL solution. After addition of ammonia buffer and Eriochrome Black T, the prepared solution was titrated using EDTA which required 16.0 mL. Calculate the molarity of the EDTA solution. * Identify the general type of titrimetric method used. * Identify the indicator in the titration * Identify the endpoint color
The Telluride ion was determined by indirect titration with EDTA. To a solution containing 50.00 mL of 0.08664M Zn(CIOA)2 plus 15 mL of 1 M acetate buffer (pH 4.5) were added 50.00 mL of unknown telluride solution with vigorous stirring. The ZnTe precipitate was filtered and washed with hot water. Then NH3 was added to the filtrate (which contained excess Zn2+) until the blue colour of Zn(NH3)42+ was observed. Titration of the filtrate with 0.07854 M EDTA required 24.22 mL to reach the murexide end point. Calculate the molarity of telluride ion in the unknown.
Calcium in powdered milk is determined by ashing a 1.50 g sample and then titrating the calcium with EDTA solution, 12.10 mL being required. The EDTA was standardized by titrating 10.00 mL of a zinc solutionprepared by dissolving 0.632 g zinc metal in acid and diluting to 1.00 liter (10.80 mL EDTA required fortitration). What is the ppm concentration of Ca in the powdered milk?
Titration of Ca 2+ and Mg 2+ in a 50.00 ml sample required 25.50 mL Of 0.01115 M EDTA. A second 50 ml aliquot was made strongly basic with NaOH to precipitate the Mg 2+ as Mg(OH) 2(s). The supernatant liquid was titrated with 16.19 mL of the EDTA solution. Calculate the concetration in ppm of CaCO 3 in the sample О а. 100 O b.568.65 О с. 361.04 O d. 207.61
A 25.00 mL unknown water sample is titrated with a standardized 0.0140 M EDTA solution. It is determined that 8.54 mL of EDTA is required to reach the end point. The blank titre was determined to be 1.50 mL. Determine the concentration of Calcium in the water sample in ppm. (mwt. of CaCO3 = 100.0892 g/mol).
A 0.4071-g sample of pure CaCO3 was transferred to a 500-mL volumetric flask, dissolved using a minimum of 6 M HCl, and diluted to volume. After transferring a 50.00-mL portion of this solution to a 250-mL Erlenmeyer flask, the pH was adjusted by adding 5 mL of a pH 10 buffer. After adding an indicator, the solution was titrated with the EDTA, requiring 42.63 mL to reach the end point. What is the concentration of EDTA? Choices: 0.0191 M, 0.0955 M, 0.00955 M, 0.477 M
A solution containing chloride ion was analyzed by the Volhard method. A 50.00 mL sample containing chloride ion was treated with 25.00 mL of 0.2500 M silver nitrate. The precipitated AgCl was removed from the solution by filtration, and 1.00 mL of 0.1000 M Fe3+ was added to the filtrate. This new solution was then titrated with 10.67 mL of 0.2380 M KSCN. What is the concentration of chloride ion in the original solution?