A 3-core cable (3-Øline) transfer 33 kV and 50 Hz, If the conductor-earth capacitance (Ce) is 0.23 UF per km, find the core-core capacitance (Ce) to make the charging current is 22.26 A for all the cable of long 6.43km, Then find the radius of the conductor if you know that the maximum electric stress is 45.3 kV/cm and the proportion of inside radius of outside sheath is 1.4 to the radius of each conductor.

A 3-core cable (3-Øline) transfer 33 kV and 50 Hz, If the conductor-earth capacitance (Ce) is 0.23 UF per km, find the core-core capacitance (Ce) to make the charging current is 22.26 A for all the cable of long 6.43km, Then find the radius of the conductor if you know that the maximum electric stress is 45.3 kV/cm and the proportion of inside radius of outside sheath is 1.4 to the radius of each conductor.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A. For the following figure, the diameter of each conductor is 2.5 cm. Find the inductance and capacitance per km per phase. 40 cm 40 cm 40 cm a a' b b' 10 m 10 m Phase A Phase B Phase C
The capacitance between the two conductor is 255 Farad per meter, then the Capacitance between line to ground in farad per meter is Numerical formula
9. If the GMR of the Conductor increases, the Inductance decreases. Select one: True False
In the Anderson Bridge for the measurement of inductance, drive the equations of balance for the unknown impedance L1 and R2.
Consider a three-core, three-phase, 50 Hz, 11 kV cable whose conductors are denoted as R, Y and B in the figure. The inter-phase capacitance (C₁) between each pair of conductors is 0.2 µF and the capacitance between each line conductor and the sheath is 0.4 µF. The per-phase charging current is C₂ HE C₁ ,C₁ Outer Sheath
3. A coil consist area ot 0.8 mm? The mean 2.000 turns of copper wire haU ing length par copper is 0.02 MICD ohm -m. Find' the resistance absor bed by the coil when connected acoss lov de rupply. sectional a crass - turn is 0o cm and the rerictivity the coil and . power
Two identical air core solenoid has 200 turns, length of 25 cm and cross-sectional area of 3 sq.cm. Each. The mutual inductance between them is 0.5 uH. Find the self-inductance of each coil and the coefficient of coupling
•Derive and analyse relation of capacitance for 3- core cables [CLO-2,
A ferromagnetic core in the shape of a doughnut has a cross-sectional area of 0.11 m2 and an average length of 1.4 m. The permeabil ity of the core is 1.206 × 10-3 Wb/A-t. m. Determine the reluctance of the magnetic circuit
A ten-turn solenoid has a ferromagnetic core with a relative permeability of 10,000. The length of the solenoid is l=10 cm and its cross section area is A=1 cm2. Determine the inductance L in mH. Round off to your answer to one decimal.
6. An ideal conductor of 50mH is connected in series with 175 micro farad capacitor. The combination is then connected across a 220V Ac source. At what frequency will this take a leading current of 5A?
Que :- A 8 pole tap wound dcm/c has 720 concluctora & the pole covers 70%% of the pole pitch find no: of conductors in compensating wag on each pole &