Solve the following with a free body diagram. 09.A loading car is at rest on a track forming an angle of25° with the vertical. The gross weight of the car andits load is 5500 lb, and it acts at a point 30 in. from thetrack, halfway between the two axles. The car is heldby a cable 24 in. from the track. Determine the tensionin the cable and the reaction at each pair of wheels.24 in.25G25 in.30 in.25 in.

Given data as per question Gross weight of car =5500 lb Angle =250

A loading car is at rest on a track forming an angle of 25° with the vertical. The gross weight of the car and its load is 5500 Ib, and it acts at a point 30 in. from the track, halfway between the two axles. The car is held by a cable 24 in. from the track. Determine the tension in the cable and the reaction at each pair of wheels.

A loading car is at rest on a track forming an angle of 25° with the vertical. The gross weight of the car and its load is 5500 Ib, and it acts at a point 30 in. from the track, halfway between the two axles. The car is held by a cable 24 in. from the track. Determine the tension in the cable and the reaction at each pair of wheels.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter5: Three-dimensional Equilibrium

Section: Chapter Questions

Problem 5.12P: The homogeneous 240-lb bar is supported by a rough horizontal surface at A, a smooth vertical...

See similar textbooks

Similar questions

A loading car is at rest on a track forming an angle of 25 with the vertical. The gross weight of the car and its load is 5500 Ib, and it acts at a point 30 in. from the track, halfway between the two axles, The car is held by a cable 24 in. from the track. Determine the tension in the cable and the reaction at each pair of wheels.
09.A loading car is at rest on a track forming an angle of25owith the vertical. The gross weight of the car andits load is 5500 lb, and it acts at a point 30 in. from the track, halfway between the two axles. The car is heldby a cable 24 in. from the track. Determine the tensionin the cable and the reaction at each pair of wheels
A Tractor of mass 1200kg is used to lift gravel weighing 8KN. Determine the reaction at each of the front wheel.
A loading car is at rest on a track forming an angle of 25° with the vertical. The gross weight of the car and its load is 5500 lb, and it acts at apoint 30 in. from the track, halfway between the two axles. The car is heldby a cable attached 24 in. from the track. Determine the tension in thecable and the reaction at each pair of wheels.
A loading car is at rest on a track forming an angle of25owith the vertical. The gross weight of the car andits load is 5500 lb, and it acts at a point 30 in. from the track, halfway between the two axles. The car is heldby a cable 24 in. from the track. Determine the tensionin the cable and the reaction ateach pair of wheels.
Engineering mechanics – statics 1st stage Lecturer: Amany Barrak Example : The floor crane and the driver have a total weight of 2500 Ib with a center of gravity at G. the crane is required to lift the 500-lb drum, determine the normal reaction on both the wheels at A and both the wheels at B when the boom is in the position shown. 12 fi 3 ft D 30 6 ft 8.4 ft 2.2 ftl 1.4 ft
A freight wagon is at rest on a track at an angle of 25o to the vertical. The gross weight of the wagon and its load is 36kN and acts at a point 750 mm from the track, in the middle between the two axles. The wagon is held by a cable 600 mm from the track. Determine the traction on the cable and the reaction on each pair of wheels.
2. A loading car, as given in figure, is at rest on a track forming an angle of 25° with the vertical. The gross weight of the car and its load is 5000 lb, and it is applied at a point 30 in. from the track, halfway between the two axles. The car is held by a cable attached 24 in. fromthe track. Determine the tension in the cable and the reaction at each pair of wheels. 24 in. 25 25 in. 30 in. 25 in.
Member ABC is rigidly fixed to the collar at A. The collar can slide freely on the pole and can freely rotate about the y-axis. With the load shown at B, determine the tension in the cable and all of the components of the reaction at A. (Note: because there is a single support at A, you will need to consider moments as a part of the reaction at A.) D 18 lb 6 in. 6 in. 3 in.
2. A vertical force of 80 pounds acts on the crankshaft. Determine the horizontal equilibrium force P that must be applied to the handle, and the x, y, z components of reaction at the journal bearing (A) and thrust bearing (B). The bearing are properly aligned and only exert force reactions on the shaft. 80 lb 8 in. 4 in. 6 in. 14 in. B 10 in. 14 in.
! Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The pin at B is attached to member ABC and can slide freely along the slot cut in the fixed plate. Neglect the effect of friction. P 10 in D 6 in. 8 in. Determine the couple M required to hold the system in equilibrium when 0 = 30° and P= 40 lb. The couple M required to hold the system in equilibrium when 0 = 30° is lb.in.
A trailer weighing 2400 lb is attached to a 2900-lb pickup truck by a ball-and-socket truck hitch at D. P D A B C 9 ft t+3 ft- 5 ft 4 ft - 2 ft Determine the reactions at each of the six wheels when the truck and trailer are at rest. The reaction at wheel A is The reaction at wheel Bis The reaction at wheel Cis | lb. Ib. Ib.