A min cage of mass 4t is to be raised with an acceleration of 1.5m/s2 by a cable passing over a hoist drum of 1.5m diameter. What is the power required when the load has reached a velocity of 6m/s, neglecting the inertia of the drum and weight of the cable, but allowing for bearing friction torque of 3kN at the drum? What is the power required at a uniform velocity of 6m/s

A min cage of mass 4t is to be raised with an acceleration of 1.5m/s2 by a cable passing over a hoist drum of 1.5m diameter. What is the power required when the load has reached a velocity of 6m/s, neglecting the inertia of the drum and weight of the cable, but allowing for bearing friction torque of 3kN at the drum? What is the power required at a uniform velocity of 6m/s

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.57P: The square-threaded screw with a pitch of 10 mm and a mean radius of 18 mm drives a gear that has a...

See similar textbooks

Similar questions

A Mine cage of mass 4t is to be raised with an acceleration of 1.5 m/s by a rope passing over a hoist drum of 1.5 m diameter. What is the power required when the load has reached a velocity of 6 m/s, neglecting the inertia of of the drum and the weight of the rope, but allowing for a bearing friction torque of 3kN m at the drum. What is the power required at a uniform velocity of 6 m/s
A single cylinder reciprocating engine has speeded 300 RPM. Stroke 250 mm, mass of reciprocating parts 50 kg. Mass of revolving parts at 150 mm radius 37 kg. If two fourth of the reciprocating parts and all the revolving parts are to be balanced, find (i) The balance mass required at 400 mm radius (ii) The residual unbalanced force when the crank has rotated 45° TDC.
A three cylinder radial engine driven by a common crank has the cylinders spaced at120°. The stroke is 138 mm, length of the connecting rod is 252 mm andthe mass of the reciprocating parts per cylinder is 2.2 kg. Calculate the primary and thesecondary forces at crank shaft speed of 1500 rpm.
A single cylinder reciprocating engine has speed 240 rpm, stroke 300 mm, mass of reciprocating parts 50 kg, mass of revolving parts at 150 mm radius 30 kg. If all the mass of revolving parts and two-third of the mass of reciprocating parts are to be balanced, find the balance mass required at radius of 400 mm and the residual unbalanced force when the crank has rotated 60° from IDC.
A flypress has two rotating spheres, each of mass 5 kg, fixed to a horizontal arm, so that they are at a radius of 700 mm from the axis of rotation. When the press is used to punch holes in a metal plate, the initial speed of the arm is 5 rev/s and the speed falls to 4.5 rev/s during one operation. Find the energy used in the punching stroke and the average force exerted if the plate is 12 mm thick.
roblem 8.45 To get a flat, uniform cylindrical satellite spinning at the correct rate, engineers fire four tangential rockets as shown in the figure (Figure 1). Suppose that the satellite has a mass of 3600 kg and a radius of 2.6 m, and that the rockets each add a mass of 250 kg Part A What is the steady force required of each rocket if the satellite is to reach 25 rpm in 2.0 min starting from rest? Express your answer to two significant figures and include the appropriate units. HA ? Figure 1 of 1 R End view of cylindrical satellite F= Value Units Submit My Answers Give Up Incorrect; Try Again; 4 attempts remaining Provide Feedback Continue
The agricultural machine is powered by an electric motor through a flat beltsystem. The machine requires 6 flat belts and 40 kW power to operate at aspeed of 350 rpm. The pulley diameter of the machine is 650 mm and the pulleyof the electric motor is 330 mm. The centre distance between the pulleys is1100 mm. The belt speed is not to exceed 30 m/s. Calculate the tensions in thebelt.
In a Hartnell governor, the lengths of the ball and the sleeve arms are equal. The extreme radil of rotation of the balls are 60 mm and 80 mm and the corresponding speeds are 160 r.p.m and 175 r.p.m. Each ball has a mass of 2 kg. Find the spring stiffness and the initial compression of the central spring.
The arms of a Hartnell governor are of equal length. When the sleeve is in the mid- position, the masses rotate in a circle with a diameter of 150 mm (the arms are vertical in the mid-position). Neglecting friction, the equilibrium speed for this position is 360 rpm. Maximum variation of speed, taking friction into account, is to be 6% of the mid- position speed for a maximum sleeve movement of 30 mm. The sleeve mass is 5 kg and the friction at the sleeve is 35 N. Assuming that the power of the governor is sufficient to overcome the friction by 1% change of speed on each side of the mid-position, find (neglecting obliquity effect of arms), the (i) mass of each rotating ball (ii) spring stiffness (iii) initial compression of the spring
Consider an Atwood machine with m= 2.Okg and M= 12.0kg, and the pulley's mass is negligible. M m 3) Calculate the acceleration of the system. Your answer 4) Calculate the magnitude of the Tension on the rope. Your answer Consider the SAME masses from the previous scenario on a pulley system on an incline plane. The angle of inclination is 40'. 5) Calculate the acceleration of the system. Your answer 6) Calculate the magnitude of the Tension on the rope. Your answer
A 100 kg timber pole AB is at rest when is zero. The pole is connected to a cable at point A. An electric motor installed on a stationary frame lifts up the pole as shown in the figure below by exerting a constant torque of 75 N.m. Find the angular velocity of the pole when is 60⁰. Highlight both the value and direction clearly. What is the tension in the cable when 0 is 75⁰? Note: The friction and masses of the pulley and the cable can be neglected. The diameter of the disk motor that the cable is attached to is 20 cm. d=20 cm Electric Motor (M) Cable T = 75 N.m C B 3 m 4 m
In a four bar mechanism the link AB rotates with angular velocity of 20rad/s and angular acceleration of 100 rad/s both in clockwise direction when it make an angle of 45° with link AD which is fixed .The length of various linkages are AB=CD=400 mm,BC=500mm and AD=750mm .Neglect the gravitational effect and friction.The mass of link is 5kg/m. Find the torque on output link E (2) (4) A (1) (1)