A pneumatic system operating at 85 psi comprises a series of pneumatic actuators which consume 2.4 CFM when operating. What is the minimum required CFM from a compressor which produces 120 psi?
Q: 4) The water pump in the Figure maintains a pressure of 6.5 psig at point 1. There is a filter, a…
A: Below is the clarified and detailed explanation for above tricky question....if you are ok with my…
Q: A bare slab fuel element is 0.2 inches thick with a thermal conductivity of 10 BTU/hr-ft-F. It…
A: This problem involves heat conduction in a slab and can be solved using the heat conduction…
Q: The Product Safety Act is administered by a division of OSHA, which promulgates consumer product…
A: The objective of the question is to verify the accuracy of the statement that the Product Safety Act…
Q: EXERCISE A uniform magnetic field directed along the x-axis changes with time according to B =…
A: Magnetic field, B = (0.02 t 2 + 4.50 )T, t is in secRadius, r= 1.80 cm, magnitude of electric field=…
Q: Consider a simple ideal Brayton cycle with air as the working fluid. The pressure ratio of the cycle…
A:
Q: mechanism shown, and state the character of the assembly. The number of Links L is
A: Identify the number of links, full joints and half joints, and then determine the degree of freedom…
Q: Heat Treatment and Thermo Mechanical Processes: Normalization, Annealing, Recrystallisation,…
A: Heat treatment and thermo-mechanical processes can significantly alter the properties of materials…
Q: 5.66 A variable mesh screen produces a linear and axisymmetric velocity profile as indicated in Fig.…
A:
Q: The compound beam is fixed at E and supported by rollers at A and B. There are pins at C and D. Take…
A: Given data:Find:the reaction at support AThe reaction support B
Q: Q3/ A simply supported beam of weight 20KN/m is supported at A&B, AB= 5m. Two-point loads of (W)KN &…
A:
Q: Before the application of the impulse to after the removal of the impulse: 13. Which has greatest…
A: Disclaimer from Bartleby:Hello. Since your question has multiple sub-parts, we will solve the first…
Q: 2. Consider the following steel shaft (E = 30 x 106 psi) A w-200 lb/in 0.75d 0.75d V 5 in.- 15 in. A…
A: To findWhat is the diameter d so the deflection at the middle is not larger than 0.2 mmgivenModulus…
Q: 22. Develop an algorithm, along with the program (preferably in python), to find the temperature…
A: import numpy as np # Constants and parameters L = 0.01 # Thickness of the wall (m) h = 1100 #…
Q: The simply supported beam shown supports a uniformly distributed load of w = 50 kN/m. Assume x = 1.6…
A: Principal stress and maximum shear stress are determined Explanation:Step 1: Step 2: Step 3: Step 4:
Q: Q2/ A beam AB of span 9m is simply supported at the ends. The beam carries point load of 2KN upwards…
A: It is given that, length of the beam AB is 9 m and it is supported at the ends.At the location 2m…
Q: 1. Consider the function 1 f(x)= 2 +3 E-2,0] Divide the domain into 9 evenly spaced points and…
A: “Since you have posted a question with multiple sub parts, we will provide the solution only to the…
Q: Using an allowable stress of 158 MPa, determine the largest bending moment M that can be applied to…
A: Largest bending moment that can be applied is 81.864 KNmExplanation:Step 1:Step 2:Step 3:
Q: Drilling and Completion Engineering II An exploration well is to be drilled to a total depth of…
A:
Q: Please don't provide handwritten solution ...
A: Hence the Moment Diagram as shown belowExplanation:Step 1: A continuous beam is laid on three…
Q: Consider a commercial airliner flying at a speed of 540 mph (relative to the air) at an altitude of…
A: Using the 1976 US Standard Atmosphere, at an altitude of 30,000 feet,Temperature = - 56.5 °C = 216.5…
Q: 3. You're at the dog park and are throwing a tennis ball (A) for your dog. After throwing it, you…
A:
Q: 24. The three branches of a hydraulic system require flow rates of 12, 25, and 18 gpm, respectively.…
A: Given:flow rates from the three branches of hydraulic system:Find:the correct reservoir size that…
Q: Question 4 [3/22]: The system is released from rest in the position shown. Calculate the tension T…
A: system of pulley and block with FBD
Q: 4) Consider the system below. Write the equation of motion and calculate the response assuming that…
A: Given data:
Q: A gas has an initial Temperature of 16 ºC and a pressure of 14.7 psia. If the temperature increases…
A: The new pressure of the gas is 16.17 psia .Explanation:Step 1:Step 2:Step 3:
Q: If resistance of 1000ft of copper wire is about 1 omega at room temperature (68F), A. At what…
A: Resistivity of copper is Coefficient of resistivity As we know :
Q: An overhang beam is loaded as shown, determine the slope, Ele, and deflection, Ely, at the right end…
A: Given:The diagram of the beam is shown below;
Q: Problem 3: Calculate the horizontal velocity v with which the 48-lb carriage must strike the spring…
A: The weight of the carriage,
Q: If a company has 10 or fewer workers, it is not required to keep injury and illness records?
A: The question is asking whether a company with 10 or fewer employees is exempt from keeping records…
Q: The device shown in figure below can be analyzed as a pin-jointed fourbar mechanism in series with a…
A: The angle made by the link OC with the horizontal axis, The length of the link AB, The length of the…
Q: 6. Consider a material with a constitutive law: σ = 75 +20€0.3 MPa. a) Find the strain at necking…
A: Given:The stress is the power is strain is the initial diameter is the final diameter is According…
Q: = How long should it take to boil an egg? Model the egg as a sphere with radius of 2.3 cm that has…
A:
Q: Find the center of mass of a uniform slice of pizza with radius R and angular width \theta Express…
A: Given:The radius of the slice of a pizza is The angle made by the slice of a pizza is
Q: A 4.0-nm-diameter protein is in a 0.050 M KCl solution at 25° C. The protein has 9 positive and 20…
A: The objective of the question is to calculate the electric potential of a protein at the surface and…
Q: 5.89 An inward flow radial turbine (see Fig. P5.89) involves a nozzle angle, a₁, of 60° and an inlet…
A: To findDetermine the energy transfer per unit mass of fluid flowing through this turbine if the…
Q: Boiling temperature (°C) of water at 7200 m altitude?
A: The solution is provided below.
Q: The mechanism shown in figure below has been taken from a feed device for an automated ball bearing…
A:
Q: The device shown in figure below can be analyzed as a pin-jointed fourbar mechanism in series with a…
A: The angle made by the link OC with the horizontal axis, The length of the link AB, The length of the…
Q: Two speakers emit identical sinusoidal waves. The speakers are placed 8.9 m apart You are standing…
A: To findWhat is the wavelength of the sound?GivenTake the speed of sound, frequency,
Q: Laplace Transform Technics 13. Find the Laplace transform of x(t), L[x(t)]. 2(t)+3(t)+x(t) = 5, x(0)…
A: Given:
Q: Question 2 (Type B): A triangular thin plate is supported by a ball-and-socket joint at A and a…
A: Given:The diagram of the problem is given below;
Q: The refrigerant R134a is passing through the diffuser with the inlet diameter of D1=1 inch;…
A: Temperature Explanation:Step 1:Step 2: Step 3: Step 4:
Q: A laminated plastic beam of triangular cross section is built up by gluing together three sections…
A: To findCalculate the minimum height h.GivenLength of beam, allowable shear stress, distributed load,…
Q: Compute the moment of inertia about the x and y axes, product of inertia, maximum and minimum…
A: calculate the area of the diagram The area of a larger triangle the area of a second triangle area…
Q: Aang and Katara was enjoying an afternoon snack in an igloo resort where the room temperature is…
A:
Q: For a hollow shaft of external and internal diameters 10 cm and 4 cm respectively, the torsional…
A: Given data :- D=Outer diameter =10cmd=Inner diameter =4cmCalculate :- Polar modulus is defined as…
Q: J 6 A semi-infinite solid, with a boundary condition of convection on the surface (Tfluid = 100°, h…
A: Given:The temperature of the fluid, The convective heat transfer coefficient, At time , the uniform…
Q: Example 3: A non-uniform stratified sand filter described in Table below is to be backwashed at the…
A: Backwash Velocity (Vb) = 2.5 x 10-2Depth of bed (D) = 0.65Porosity of bed (n) = 0.45Coefficient of…
Q: Determine the components of the reactions at A and B if a 62-lb load
A:
Q: A student working 3.0m away from you in a chemistry lab performs an experiment which creates a bad…
A:
A pneumatic system operating at 85 psi comprises a series of pneumatic actuators which consume 2.4 CFM when operating. What is the minimum required CFM from a compressor which produces 120 psi?
Step by step
Solved in 3 steps with 1 images
- What size of receiver tank (gal) for a compressor is required if the pneumatic system is used to drive 5 linear cylinders which collectively consume 12 SCFM for 5 minutes? The compressor pressure switch operates between 90 and 110 psi. Add your answer Integer, decimal, or E notation allowed1. Pressure gauge the hydraulic cycle in figure -consist of:7 5 6 X LB ww M 3 Feed direction & tank O accumalator O intensifier O 3 way 2 position control valve OWhat size of receiver tank (gal) for a compressor is required if the pneumatic system is used to drive 5 linear cylinders which collectively consume 12 SCFM for 5 minutes? The compressor pressure switch operates between 90 and 110 psi.
- Find the pressure range for the two Pressure Transmitters, PT1 and PT2? A = Maximum level = 133", B = 1", C = 3" D=5", E = 2", S.G. = 1.02 Blank #1: PT1 Min = Blank #2: PT1 Max = Blank #3: PT2 Min = Blank #4: PT2 Max = "WC "WC "WC "WC OPTI E D LOPT2 MacBook Pro Search or type URL <2) A compressor system which is controlled by starting-and-stopping is composed of a compressor with pumping capacity of 50 m3/min of free air and a receiver tank of 20 m3. The circuit demand is 25 m3/min of free air. No of start/stops is required to be 15 every hour. If the maximum line pressure is 8 bar gauge, what must be the low level pressure ?In hydraulic and pneumatic circuit designs, certain steps are required that must be followed sequentially, order these steps in the correct order; 6.- Power generation sources. 1.- Determine the necessary functions and requirements to be met. 4.- Actuator control system. 2.- Determine the form of connection between the cylinders and the valves. 5.- Sequence of movements and signal transmission. 3.- Components required to perform the functions. O 1, 2, 4, 3, 6, 5. O 3, 4, 5, 6, 1, 2. O 1, 3, 4, 2, 6, 5. O 6, 4, 3, 5, 1, 2.
- The figure below shows a schematic representation of compressor characteristics. What is the name usually given to the uppermost line that contains point d only? Pressure ratio 1.0 mc, Toz m2 APoz AnswerDetermine the output pressure of a compressor operating with the following data: a. Actual power required to drive the compressor is 20 kW. b. Overall efficiency of the compressor is 75%. c. Compressor delivers four standard m3/min. d. Compressor inlet pressure is 100 kPa abs.b) The bore diameter of each cylinder in a sir-cylinder four-stroke internal combustion engine is 32 mm and the stroke of each piston is 125 mm. During testing, the engine runs at 1450 revolutions per minute (pm) with a pressure-volume indicator diagram showing a mean net area of 2 90 cm' and a diagram length of 0.85 cm. The pressure scale on the indicator diagram is set to 165 kNmper cm Calculate the mean effective pressure (mep) and the indicated power in klowatts (aW) developed by this six-cylinder four-stroke engine. Give your answer to 2 decimal places. c) A hollow connecting rod has an inner diameter of 26.25 mm and is subjected to an axial tensile load of 500 MN. the maximum allowable stress for this hollow rod is 325 KNimm, calculate the minimum thickness of the rod. Give your answer in millimetres (mm) and to 2 decimal places.
- The system shown below is to be designed for the gathering of gas. Well "A" is a following gas that will deliver 94.17 10' m'. The well "B" contains high gas-oil ratio wells, it is necessary to know that the compressor discharge pressure is 2.65 Mpa in order to deliver 61.09*10' m'. The pressure at the transmission line point is 2.07 Mpa gauge. Average following temperature will be (122 -158 °), compressibility factor (0.915-0.983), and that specific gravity of the following gas 0.69 and that of the other gas well is 0.71. The pressures at point "A and D" are 2.86, and 2.47 Mpa respectively. Estimate efficiency and the unknown values on figure. AL-? D-11.15 cm L-16.1 km D-? D B L= (4.83 – 9.2) km D= 10.24 em Note: 1- Each Student using different value of temperature and compressibility factor by taking as. Like: Temperature (123.23 ") and compressibility factor 0.933 2- Any similarity in solution student grade equal zero.Choose the symbol for Fixed displacement single rotation compressor. Select one: Ob. Oc. d.A(n)_______varies the frequency of an electronically altered sine wave, which affects the speed of alternating current motors.