A right cylindrical container 4 m. diameter is 3 m tall. A 50 mm diameter hole is provided at the bottom of the container to drain the water when necessary. If it is full of water, how long in hours does it take to empty the container from the instant the hole is opened? Coefficient of velocity and coefficient of contraction are both equal to 1.0. A.1.39 hoursC.1.13hoursB.1.26 hoursD.1.49hours

A right cylindrical container 4 m. diameter is 3 m tall. A 50 mm diameter hole is provided at the bottom of the container to drain the water when necessary. If it is full of water, how long in hours does it take to empty the container from the instant the hole is opened? Coefficient of velocity and coefficient of contraction are both equal to 1.0. A.1.39 hoursC.1.13hoursB.1.26 hoursD.1.49hours

Name: A right cylindrical container 4 m. diameter is 3 m tall. A 50 mm diame
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A right cylindrical container 4 m. diameter is 3 m tall. A 50 mm diameter hole is provided at the bottom of the container to drain the water when necessary. If it is full of water, how long in hours does it take to empty the container from the instan

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter1: Heat, Temperature, And Pressure

Section: Chapter Questions

Problem 17RQ: Convert 22C to Fahrenheit.

See similar textbooks

Similar questions

Hello i have an example with an answer , please show the solution since only the answer was shown in this example. And i need its solution to review properly. Thank you 1. ) Question : A pump has a brake horsepower of 35 hp with an efficiency of 68%. Neglecting frictional losses, calculate the volume flow rate (m3/min) if the discharge is raised 60 meters above.Answer: 1.82
Two tubes are mounted to the roof of a car. One tube points to the frontof the car and the other points to the rear. the tubes are connected to amanometer filled with fluid of sg 0.60. When the height difference is 2inches. What is the car speed in mph? CHOICES: a. 43.8 b. 62 c. 50 d. 46
a faucet is running water at the rate of one-half pint every minute. What is this flow rate expressed on pints per hour?
Solve this question on 30 min
1. Fill in the missing spaces and determine the direction of from in Pipe D. C Pipe A B с D E F G Flow (ft³/sec)) 100 60 20 (D Velocity (ft/sec) 15 20 Area (ft²) 20 6 10 15
4) A stone is dropped down a well and 5 s later the sound of the splash is heard. If the velocity of sound is 260 fps, what is the depth of the well in meters.
A piston reciprocates 100 times per minute (single stroke). The length of the stroke is 6 inches. What is the average wristpin velocity in ft/min?
2. A car is traveling on a highway at 28 m/s. a) What is the pressure at the bottom of a car's gas tank. that is a cube with side lengths of 0.5 meters? Assume the tank is full of gasoline with a denisty of 800 kg/m^3. b) How much pressure does a pump need to supply in order to draw gasloine from the bottom of the tank to the top of the tank? The velocity of the gasoline once it is pumped out of the tank should be 1 cm/s; the gas at the bottom of the tank is at rest. c) The gasoline from part b flows through a tube (cylinder) of radius lcm before entering a larger tube of radius 10cm. What will the velocity of the gasoline be in the larger tube? d) The tires on the car have an outer radius of 0.2 meters. How many complete rotations did the tires go through in one hour? Hint: Determine how far the car travels in one hour. e) How many hours can the car travel before running out of gas? f) During your journey. you hit a pothole and have to change your tire. You get your spare…
H.W2: two large plate surfaces are 2.4cm. the space between the surface if filled v glycerine.what force is required to drag a very thin plate of surface area 0.5m² between two large plane surfaces speed of 0.6m/s,if: a) The thin plate is in the middle of the two plate surfaces. b) The thin plate is at a distance of 0.8cm from one of the plane surfaces. Take the dynam viscosity of glycerin 8.1*10' N s/m?. %D
The velocity and pressure at the entrance to a horizontal pipe are 0.7 m/s and 101040 Pa respectively. The velocity at the exit of the pipe is 1.6 m/s. What is the pressure at the exit of the pipe? 100 kPa O a 99.52 kPa b. 101.26 kPa O C. 102.57 kPa d.
1. A 450 mm ice tube with 0.56ft^3/slug specific volume, melts and filled a spherical container. Determine the diameter of the container in inches. 2. If the sp. Volume of a certain is fluid is 0.7848m^3/kg. What is the specific weight (N/m^3)?
FLUID MECH Support your answer with the appropriate solution and diagram. 3. A rectangular raft made of solid timbers (s=0.60) is 3 m wide and 6 m long x 60 cm thick. A man weighing 800 N steps on the edge of the at the middle of one of the longitudinal sides. Determine by how much the thickness of the raft will be depressed below the water surface along the side in mm. A. 10 B. 20 C. 30 D. 40