An air-conditioner with refrigerant-134a as the working fluid is used to keep a room at 26°℃ by rejecting the waste heat to the outdoor air at 34°C. The room gains heat through the walls and the windows at a rate of 250 kJ/min while the heat generated by the computer, TV, and lights amounts to 900 W. The refrigerant enters the compressor at 500 kPa as a saturated vapor at a rate of 100 L/min and leaves at 1200 kPa and 50°C. Determine (a) the actual COP, (b) the maximum COP, and (c) the minimum volume flow rate of the refrigerant at the compressor inlet for the same compressor inlet and exit conditions.

An air-conditioner with refrigerant-134a as the working fluid is used to keep a room at 26°℃ by rejecting the waste heat to the outdoor air at 34°C. The room gains heat through the walls and the windows at a rate of 250 kJ/min while the heat generated by the computer, TV, and lights amounts to 900 W. The refrigerant enters the compressor at 500 kPa as a saturated vapor at a rate of 100 L/min and leaves at 1200 kPa and 50°C. Determine (a) the actual COP, (b) the maximum COP, and (c) the minimum volume flow rate of the refrigerant at the compressor inlet for the same compressor inlet and exit conditions.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 12RQ: Refrigerators currently being manufactured in the United States are using______as their refrigerant.

See similar textbooks

Similar questions

developing 60kw of refrigeration using refrigerant R134a with condensing temperature 400C and evaporating -30 oC vapor is superheated before entering the compressor by 5 oC while the liquid will be sub-cooled by 6 oC, CalculateThecoefficient of performance and The total work done in the cycle and The mass flow rate of the refrigerant
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much vapor must the steam ejector remove from the flash chamber?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much make-up water is needed?
A refrigeration system with a capacity of 15 tons of refrigeration, operates at 150 kPa in the evaporator, while in the condenser it is 1100 kPa. If R-134a refrigerant is in a saturated state, calculate the theoretical power required to operate the compressor. Compressor Power. Answer in kW
An air conditioner with refrigerant-134a as theworking fluid is used to keep a room at 26C by rejectingthe waste heat to the outside air at 34C. The room isgaining heat through the walls and the windows at a rate of 250 kJ/min while the heat generated by the computer,TV, and lights amounts to 900 W. An unknown amountof heat is also generated by the people in the room. Thecondenser and evaporator pressures are 1200 and 500 kPa,respectively. The refrigerant is saturated liquid at the condenserexit and saturated vapor at the compressor inlet. Ifthe refrigerant enters the compressor at a rate of 100 L/minand the isentropic efficiency of the compressor is 75 percent,determine (a) the temperature of the refrigerant at thecompressor exit, (b) the rate of heat generation by the peoplein the room, (c) the COP of the air conditioner, and(d) the minimum volume flow rate of the refrigerant at thecompressor inlet for the same compressor inlet and exitconditions.
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration A) How much chilled water at 5oC does this system provide? B) How much make-up water is needed? C) How much vapor must the steam ejector remove from the flash chamber?
I need help on the following question: The vapour compression cycle (picture provided), utilises the refrigerant R134a flowing at 0.05 kg s-1. Assuming that the compression is adiabatic and reversible. If the actual input power to the compressor is 2 kW, then: 1. You need to determine the theoretical input power to the compressor and the heat transfer (Φ) to theevaporator. Take the enthalpies h1, h2, and h3 to be 238.41, 263.68 and 81.5 kJ kg-1 (use the 'NH3 Refrigeration Table' where you can find online). 2. You need to determine the coefficient of performance based on your answer to the previous question (1). 3. You need to determine the compressors mechanical efficiency.
An air conditioner with refrigerant-134a as the refrigerant is used to keep a large space at 20°C by rejecting the waste heat to the outside air at 37 °C. The room is gaining heat through the walls and the windows at a rate of 125 kJ/min while the heat generated by the computer, TV, and lights amounts to 0.7 kW. Unknown amount of heat is also generated by the people in the room. The condenser and evaporator pressures are 1200 and 500 kPa, respectively. The refrigerant is saturated liguid at the condenser exit and saturated vapor at the compressor inlet. If the refrigerant enters the compressor at a rate of 65 L/min and the isentropic efficiency of the compressor is 70%, determine (a) the temperature of the refrigerant at the compressor exit, (b) the rate of heat generated by the people in the room, (c) the COP of the air conditioner, and (d) the minimum volume flow rate of the refrigerant at the compressor inlet for the same compressor inlet and exit conditions.
Refrigerant-134a enters the condenser at 200 kPa and 100C and it leaves at 200 kPa with a quality of 45 percent in a heat pump. The load of heat pump is 700 W and COP of the heat pump is 3.5, determine The rate of heat gains from the environment The minimum compressor work The mass flow rate of the refrigerant
A vapor compression refrigeration systemhas an enthalpy of saturated liquid at the hightemperature side is 341.769 kJ/kg while at lowtemperature side is 131.27 kJ/kg and a latentheat of vaporization of 1312.63 kJ/kg. If themass flow rate of refrigerant is 0.50 kg/s.compute the tons of refrigeration.
The compressor of a refrigerator using refrigerant R134a draws 1.2 kW. Since the evaporation temperature in the evaporator is -22 °C and the condensation temperature in the condenser is 38 °C; (a) Plot this refrigerator system schematically with its elements and show it on the T-s and P-h diagram of the refrigeration cycle (b) The cooling power of the refrigerator (c) The amount of heat the refrigerator gives to the environment (d) Calculate the ideal and Carnot COP cooling values of this refrigerator.
(a) Figure 3 shows a refrigeration system using Refrigerant-134a as the refrigerant has a compressor that consumes 800 W of power when operational. The refrigerant enters the evaporator at 100 kPa as saturated mixture of quality 25% and leaves the condenser the same pressure as at a temperature of -26°C. Determine the rate of heat rejected (Q.) at the condenser and the COP of the refrigerator. The mass flow rate of the refrigerant is 0.005 kg/s. condenser expansion compressor valve evaporator Figure 3: Refrigeration system (b) After graduation, you decided to work overseas to experience living in a country with four seasons. Your neighbour, knowing that you are an engineer asked your help to install a heat pump system for his house. He wanted to always maintain the temperature in his house at 24°C during winter. In that area during winters, average outside temperature is -3°C. He also has an underground water well with average water temperature of 10°C during winter. You estimated that…