Consider a VC network with a 2-bit field for the VC number. Suppose that the network wants to set up a virtual circuit over four links: linkA, link B, link C, and link D. Suppose that each of these links is currently carrying two other virtual circuits, and the VC numbers of these other VCs are as follows: Link A Link B Link C Link D 00 01 10 11 01 10 11 00 In answering the following questions, keep in mind that each of the existing VCs may only be traversing one of the four links. a. If each VC is required to use the same VC number on all links along its path, what VC number could be assigned to the new VC? b. If each VC is permitted to have different VC numbers in the different links along its path (so that forwarding tables must perform VC number translation), how many different combinations of four VC numbers (one for each of the four links) could be used?

Consider a VC network with a 2-bit field for the VC number. Suppose that the network wants to set up a virtual circuit over four links: linkA, link B, link C, and link D. Suppose that each of these links is currently carrying two other virtual circuits, and the VC numbers of these other VCs are as follows: Link A Link B Link C Link D 00 01 10 11 01 10 11 00 In answering the following questions, keep in mind that each of the existing VCs may only be traversing one of the four links. a. If each VC is required to use the same VC number on all links along its path, what VC number could be assigned to the new VC? b. If each VC is permitted to have different VC numbers in the different links along its path (so that forwarding tables must perform VC number translation), how many different combinations of four VC numbers (one for each of the four links) could be used?

EBK ELECTRICAL WIRING RESIDENTIAL

19th Edition

ISBN:9781337516549

Author:Simmons

Publisher:Simmons

Chapter29: Service-entrance Calculations

Section: Chapter Questions

Problem 3R: a. What is the ampere rating of the circuits that are provided for the small-appliance loads? _____...

See similar textbooks

Similar questions

Do you think it is also possible to perform k-map using maxterms? How? Explain the differences when doing so compared to when using minterms.
DON'T NEED TO WRITE STORIES.DON'T COPY. OTHERWISE I WILL GIVE YOU DOWNVOTE. 42) What is the function of MCB. Write two advantages and disadvantages of MCB.
Where did VBE come from if it was not given in the problem? How do you compute that value if it's not given?
Q2. It is required to design a sequence detector that detects overlapped occurrences of the sequence 10010. The circuit receives a serial input X and produces a serial output Z. The output Z will be 1 when the circuit detects the sequence 10010. Assume the existence of a reset input to reset the machine to a reset state. Draw the state diagram of the circuit assuming a Moore model. The following is an example of some input and output streams: Input X 0010010010 1 0 0 1 00 Output 0000 0 0 010010 00 0 1
3. Design and Show the connection on the circuit that would add two 6-bit data, D: (D6 Ds Di) and H: (H6 Hs Hi). You may use 4-bit adders. Draw the circuit and clearly indicate/identify all input and outputs. Show addition of Ds to Hs and Sum (Es). Do not draw switches, resistors, and LEDS at inputs or outputs. 7483A 7483A A. A, A, A1 B. B. B, B, B. B. B, C, C. C. C. B,
First let's clarify that this question concern digital circuits "IC" do now if that makes difference i tried searching in google but couldn't find need logic circuit. my question is down below i hope if you can tell me why the circuit is just regular electronics rather than logic ones. I know that logic gates are in fact consist of transistors but i wasn't expected to see regular electronic in the assignment sent by my teacher. Anyway... the question start from discuss you can ignore the others Discuss Astable multivibrator by directly stating it circuit diagrams, output waveforms, and principle of operations plus their use cases(applications).
Draw the state diagram for a Modulo-6 synchronous counter which follows the count sequence000, 010, 011, 001, 100, 110, 000, 010, … . Show all possible states including the ones that are notdesired. The undesired states should be depicted to be transiting to any of the desired states.Choose the 000 state for this purpose. It is important to include the undesired states to ensure that,if the counter accidentally gets into any of these undesired states owing to noise or power-up, thecounter will go to a desired state to resume the correct sequence on application of the next clockpulse.
Q4/Full the following blanks (1101 1010)BCD(5211) = ( )BCD(3321)=()EX-3=()16 * (1101 1010)BCD(5211) = (1110 1100)BCD(3321)=(1010110)EX-3= (A6)16 (1101 1010)BCD(5211) = (1110 0111)BCD(3321)=(1011001)EX-3= (56)16 (1101 1010)BCD(5211) = (1101 0111)BCD(3321)=(1011001)EX-3= (2B)16 (1101 1010)BCD(5211) = (1011 1110)BCD(3321)=(1000111)EX-3= (44)16 %3D None of them
Q1/ Design Carry Look a head adder that add two (1-digit) BCD numbers.
USE DIGITAL LOGIC AND DESIGN Part 1: In Figure_4; we have 4-bit Comparator using 2-bit Comparators block. You have to satisfy given condition by applying all data on figure 4. At the end, given condition should produce HIGH output and other two should be LOW. A3 A2 A1 A0 = 1101 and B3 B2 B1 B0 = 1110 Figure_4 Part 2: The serial data-input waveform (Data in) and data-select inputs (S0 and S1) are shown in Figure_5. Determine the data-output waveforms from D0 through D3. Figure_5 Part 3: Decoder can be useful when we have to decode some specific numbers from their equivalent code. Figure 6 has a concept of 3 to 8 line decoder from which you have to generate output waveform from D0 to D7 with proper relationship to input. Figure_6 Part 4: The data-input and…
Table Q2(b) lists all 3-bit GRAY code in an increment pattern. DetermineGRAY code for X and Y by using a suitable method of GRAY codederivation.
For any two stages of the block diagram of PLL,consider any improvement depending on the functionality of the particular block. Justify your answer by explaining the operation of PLL