End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place

End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place

Name: End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place ?

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.141RP: The thin-walled cylindrical can with a spherical dimple weighs 0.2 lb. Determine the force P...

See similar textbooks

Similar questions

A certain weight of concrete (c = 25 kN/m³) must be attached to the outside bottom of a metal box having a volume of 0.1 m³ and SGbeam = 0.65. (a) What is the weight (N) of the metal box? (b) What must be the weight (N) of concrete to cause both to sink in water? (c) What is the volume (m³) of the concrete? (d) What is the combined buoyant forces (N) of the concrete and metal box?
3. A cylindrical buoy 600 mm in diameter and 1.8 m high weighs 205 kg. It i moored in salt water to a 12 m length of chain weighing 12 kg per m of its length. At high tide, the height of buoy protruding above water surface is 0.84. What could be the length of protrusion of the buoy if the tide dropped 2.1 m? Density of steel is 7,790 kg/m. Use density of water = 1000 kg/m³. W, = 205 kg %3D 0.6m 0 W = 205 kg 0.84 0.6m o 1.8m 2.1 m 0.96 BF, 1.8m D. BF', H' BF2 L Chain L' BF' Figure a: High Tide Figure b: Low Tide
[Stability] A 10-cm by 10-cm wood (sg = 0.65) with a length of 2 m is placed in water. Determine the weight of steel ( = 78.5 kN/m3) that must be fastened at one end of the wood such that the wood will stay upright with 0.5 m is above the water surface. Find the: weight of steel=__________ N
A cubical float, 1.22 m on a side, weighs 1.78 kN and is anchored by means of a concrete blockthat weighs 6.67 kN in air. If 229 mm of the float is submerged when the chain connected to theconcrete is taut, what rise in water level will lift the concrete off the bottom? Concrete weighs23.56 kN/m3
1. A solid brass sphere of 30-cm diameter is used to hold a cylindrical buoy in place (shown in the figure) in seawater (sp. gr. = 1.03). the buoy (sp. gr. = 0.45) has a height of 2 m and is tied to the sphere at one end. What rise in tide, h, will be required to lift the sphere off the bottom? 50cm h 30cm sp. gr. = 13.5
A wooden column (SG = 0.65) is 5 cm by 5 cm by 2.2 m long. What weight of lead (SG = 11.4) is needed at the bottom end of the wood so that the rod will float vertically with 30 cm sticking out of the water? Unit of your answer should be in Newtons.
13) A trapezoidal plate 4 feet wide at the bottom, 7 feet wide at the top and 3 feet high is submerged with the top side parallel to the surface and 10 ft below the water. Find the force against the plate. (assume pg=62.4 lb/ft³)
The weight of a certain crown in air was found to be 14.0 N and its weight in water, 12.7 N. Was it gold (s.g. = 19.3)? FB W water W Crown m, V air
(need help on part C and D) A swimming pool is 30 ft wide and 60 ft long and its bottom is an inclined plane, the shallow end having a depth of 2 ft and the deep end, 8 ft. Assume the pool is full of water. (Round your answers to the nearest whole number. Recall that the weight density of water is 62.5 lb/ft3.) (a) Estimate the hydrostatic force on the shallow end. 3750 lb (Correct)(b) Estimate the hydrostatic force on the deep end. 60000 lb (Correct)(c) Estimate the hydrostatic force on one of the sides. lb(d) Estimate the hydrostatic force on the bottom of the pool. lb
what is the buoyant force of a plastic cube with 5m side floating on water if half of the block is submerged
A concrete anchor (sp. gr.= 2.4) weighing 670 N is tied to the end of along timber which measures 20 cm x 20 cm x 6 The anchor does not reach the bottom of the water but submerged 5 m of the timber. What is the specific gravity of the timber? (35 pts)
Mechanical Engineering Question