Lockout locks:Can be used to lock tool boxes, storage sheds, etc.Can be used only for lockout purposes.b.Are provided by the equipment manufacturer.d.C.Must be bright orange in color.Authorized employees must be trained:To recognize hazardous energy sources, and to know thetype and magnitude of the hazardous energy sources.To perform the lockout/tagout procedure.When an audit shows deficiencies with the procedure.d. All of the above.a.b.When authorized employees perform a shutriown, they must:Notify all affected employees that they are starting a lockoutprocedure.b.Locate all energy sources that power the equipment.Follow the procedures to shut down each machine.All of the above.C.d.If several people are needed to work on a piece of equipment:The first worker to arrive to the job is the one who appliesa.the locks,Their supervisor is the only one who needs to apply a lock.c. Each worker must apply his or her own lock.d. The person who will be the last one to finish the job is theone who applies the locks.b.

Lockout locks are used to secure a lockout device or machinery in place. This is done to protect…

Answered: Lockout locks: Can be used to lock tool…

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter3: Introduction To Engineering Design

Section: Chapter Questions

Problem 21P

See similar textbooks

Similar questions

Workers who are designated as "unqualified:" Do not need any training. Must become "qualified" within one year. Must not operate electrically powered equipment. Must be trained in safety-related work practices. a. b. C. d. Workers who are designated as "qualified:" Work on or near exposed energized parts. a. b. Must be trained to distinguish exposed live parts from other parts of eiectrical equipment, Must be trained to determine the nominal voltage of exposed live parts. C. d. All of the above. Protect yourself from electrical hazards by: Leaving covers off of electrical panels to make inspection a. easier. Wearing specialized personal protective equipment as needed. Pulling fuses instead of locking out during repairs. b. C. d. Removing the ground prong from plugs so tools can be pługged into any outlet. D. When repairs are made to the electrical systems of a machine: Any employee can do the repairs. The power only needs to be shut off at the machine's control panel. The power must be…
Drain, Waste, and Vent System 1. Major components in a DWV sgstem. 2. Different types of piping materials used for a DWV. 3. Fittings needed for a DWV system.
Sanitary engineering laboratory The residual chlorine (Free chlorine) test write about test and discussion
These are the common do's in a ladder and scaffolds except, A) install guardrails on top of high scaffolds B base plate is designed to support the scaffold straddle on top of a ladder D materials must kept in good condition E always maintain good footing on a step ladder Employers may not communicate the hazardous energy control program with workers but provide education and training on their roles and responsibilities within the program. The training should cover all types of hazardous energy they may encounter throughout their work and how it can be controlled. A True B False According to OSH Standards about demolition, which item is not included, A adequate precautions shall be taken for sudden collapse B do not overload debris or material in one place stairs, railings and access routes to be remove first no worker is allowed to work in the building edge
Describe the safety precautions for 1 ton liquid chlorine containers (i) in manufacturing to prevent explosions; and (ii) in handling for use at the water treatment plant.
1. What is a septic tank? 2. What are the objectives of constructing a septic tanks? 3 What are the considerations / standard in septic tank in terms of the following? a) Design b) Construction c) Operation d) Maintenance Reference: PD 856 Plumbing Code DOH A.O. 2019-0047
Case 1. Painter Dies from Burns Received from Explosion Inside Tank INTRODUCTION On May 19, 1989, a 41-year-old male painter (the victim) suffered burn injuries from an explosion which occurred while he was painting the inside of a 1,300-gallon tank. He died 5 days later. A 32-year-old male painter (co-worker) stationed outside the tank suffered burns and a broken arm. OVERVIEW OF EMPLOYER'S SAFETY PROGRAM The employer is a sheet metal fabrication company with 30 employees. The company manufactures steel tanks and has been in business for 20 years. Most of the employees are sheet metal workers, welders and painters. The victim had been with the company as a painter for 3 1/2 years. The co-worker had been a painter with the company for 4 years. The company has a management level employee who serves as the safety officer on a collateral-duty basis. The safety officer conducts safety meetings once a month. New employees receive a safety orientation which consists of a brief discussion of…
2a. Briefly describe the fire extinguishing process of a dry pipe sprinkler system.
Based on the materials of the course, building loads for which an HVAC system must compensate include all of the following except Select one: O a Ventilation loads O b Infiltration toads Sensible load O d. Transferrable loads Based on the materials of the course, which of the following statements about fire sprinklers is false Select one: O a. Sprinklers have a metal element that melts because of fire. O b. Smoke can cause fire sprinkler to be activated. c. Heat can activate fire sprinkler. O d. Sprinklers act as suppression and detection fire systems. Based on the materials of the course, the contrel system that uses a digtal signal to provide inturnation about the operating status and cundtons uf he HAC system s catet Select one: O a Automated Controls Systen b. HVAC system Oc. Operating System d. Building Automation System
Question #14, Case 4: HVAC units The general contractor on this project chose not to purchase the heating, ventilation, and air conditioning (HVAC) equipment from the mechanical subcontractor, but rather they purchased it directly from the manufacturer. Why would a GC do this? The shop drawings were submitted and were per specifications. The submittal was approved and returned on time. The equipment was delivered on time, but because the HVAC subcontractor had not yet mobilized on-site, the GC unloaded the mechanical units from the truck and hoisted them to location with the GC's own crane. The subcontractor connected the equipment after placement. The system was completed on schedule, but on a very hot design day, during HVAC balancing, it is discovered that the units are not keeping up with air conditioning requirements. The labels are checked, and it is discovered that they are undersized by one-third from the specified units. The approved submittal does not match up with what has…
give [Pressure, Temperature, pump capacity (Q), viscosity of the fluid, velocity of the fluid] for trash pump
A) Define “air pollution”. Enlist the “Sources of Air Pollution”. Enlist the “Pollutants causing Air Pollution”. What is “Water Pollution”? Enlist the “Sources of Water Pollution”. B) Enlist all the ‘Three Methods’ of ‘Disinfection’. Give ‘Examples’ of each one. Which ‘Method’ is generally used for ‘Municipal Water Supplies’? Discuss them with full justification.

SEE MORE QUESTIONS

Recommended textbooks for you

Engineering Fundamentals: An Introduction to Engi…

Civil Engineering

ISBN:

9781305084766

Author:

Saeed Moaveni

Publisher:

Cengage Learning

Construction Materials, Methods and Techniques (M…

Civil Engineering

ISBN:

9781305086272

Author:

William P. Spence, Eva Kultermann

Publisher:

Cengage Learning

Engineering Fundamentals: An Introduction to Engi…

Civil Engineering

ISBN:

9781305084766

Author:

Saeed Moaveni

Publisher:

Cengage Learning

Construction Materials, Methods and Techniques (M…

Civil Engineering

ISBN:

9781305086272

Author:

William P. Spence, Eva Kultermann

Publisher:

Cengage Learning

SEE MORE TEXTBOOKS