mm. It carries a uniformly distributed load of 550 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young’s modulus of the material used for the beam, if it deflects 2 m maximum at the free end of the span. Also find the maximum slope of the beam. Moment of inertia of the cross section of the beam in m4 = ______________

mm. It carries a uniformly distributed load of 550 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young’s modulus of the material used for the beam, if it deflects 2 m maximum at the free end of the span. Also find the maximum slope of the beam. Moment of inertia of the cross section of the beam in m4 = ______________

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter9: Deflections Of Beams

Section: Chapter Questions

Problem 9.7.12P: A simple beam ACE is constructed with square cross sections and a double taper (see figure). The...

See similar textbooks

A Cantilever beam of dimension 10 m x 45 mm x 65 mm. It carries a uniformly distributed load of 550 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young’s modulus of the material used for the beam, if it deflects 2 m maximum at the free end of the span. Also find the maximum slope of the beam.

Moment of inertia of the cross section of the beam in m⁴ = ______________

Young's modulus of the beam material in GPa is = ___________

Maximum bending stress due to bending in MPa is = _________

The slope at the supports of beam in radians is = ___________

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A simply supported beam of dimension 11.5 m x 45 mm x 75 mm. It carries a uniformly distributed load of 450 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young's modulus of the material used for the beam, if it deflects 125 mm maximum at the mid of the span. Also find the maximum slope in the beam. Moment of inertia of the cross section of the beam in m4 = Young's modulus of the beam material in MPa is = Maximum bending stress due to bending in MPa is = The slope at the supports of beam in radians is =
A simply supported beam of dimension 12.5 m x 35 mm x 70 mm. It carries a uniformly distributed load of 450 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young’s modulus of the material used for the beam, if it deflects 150 mm maximum at the mid of the span. Also find the maximum slope in the beam. Moment of inertia of the cross section of the beam in m4 = oung's modulus of the beam material in MPa is = Maximum bending stress due to bending in MPa is = The slope at the supports of beam in radians is =
A simply supported beam of dimension 12 m x 45 mm x 65 mm. It carries a uniformly distributed load of 450 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young's modulus of the material used for the beam, if it deflects 150 mm maximum at the mid of the span. Also find the maximum slope in the beam. (Enter only the values by referring the units given, Also upload your hand written answers in the link provided) Moment of inertia of the cross section of the beam in m4 : Young's modulus of the beam material in MPa is = Maximum bending stress due to bending in MPa is = The slope at the supports of beam in radians is
Consider an 8-m long simply supported T-beam with overhangs loaded as shown below. 200 mm w kN/m 50 mm 50 kN-m 50 kN-m 200 mm 2 m 4 m 2 m 50 mm 1. Determine the location of the neutral axis measured from the top of the beam and the moment of inertia (in mm4) of the section about its neutral axis. Draw the shear and bending moment diagrams. Annotate all relevant values and distances. Determine the magnitude of the maximum negative 2. moment. Determine the minimum allowable strength of the beam in tension and the minimum allowable strength of the beam in compression. 3. Determine the maximum allowable load, w (in kN/m), that can be applied pn the beam. 4. B.
Determine the values of shear and moment at points where changes in loads occur using shear and moment diagram. Compute the moment of inertia of the beam cross-section about the neutral axis. Compute the maximum shear, tensile, and compressive flexural stresses. Write the moment equation of the beam. Draw the elastic curve. Concentrated Load = 350N, Triangular Load = 1700N/m Dimensions: Length = 1.0(2) = 2.0mm, Thickness = 40mm, Height = 200mm, Height - Thickness = 160mm
A beam of uniform rectangular cross-section is fixed at one end and carries an electric motor weighing 400 N at a distance of 300 mm from the fixed end. The maximum bending stress in the beam is 40 MPa. Find the width and depth of the beam, if depth is twice that of width. 400 N 300 mm
If Mz = 200 kip-ft, find the magnitude of the bending stress at a point H. For the beam cross section, assume a = 7 in. b = 10 in. d = 26 in. r = 3.5 in. The centroid of the cross section is located 11.96 in. below the uppermost surface of the beam. The moment of inertia about the z axis is 12903 in.4.
A beam is subjected to equal 21.7 kip-ft bending moments. Assume t₁ =t₂ = tw- 3 in., d = 15 in., b₁ = 6 in., and b₂ =8 in. The cross- sectional dimensions of the beam are illustrated. Determine: (a) the distance y to the centroid (measured from the bottom), the moment of inertial₂ about the z axis, and the controlling section modulus S₂ about the z axis. (b) the bending stress at point H (positive if tension, negative if compression). (c) the bending stress ok at point K(positive if tension, negative if compression). (d) the maximum bending stress max produced in the cross section (positive if tension, negative if compression). M Answers: (a) y = (b) 6μ = 6.978 (c) OK (c) omax = = i M in., I₂ = X i psi. psi. psi. 41 1₂ 2886.59 b₁ b₂ Cross section H K in.4, S₂ = i in.³.
For certain values of w and P, the maximum positive bending moment in the beam is +8840 lb-ft, and the maximum negative bending moment is-10336 lb-ft. The cross section of the beam is shown. The pertinent section properties of the cross section are e = 4.65 in..f -3.05 in, and I, - 13.7725 in.. Calculate (a) the maximum tensile bending stress and (b) the maximum compressive bending stress that is produced in the beam. Enter your answers with the appropriate sign. A Answer: Of= gc d B b tik psi psi C D
The cross-sectional dimensions of the beam are a = 4.8 in, b = 6.5 in, d=4.5 in, and t= 0.30 in. The internal bending moment about the z centroidal axis is Mz= -3.90 kip-ft. Answers both in psi
A rectangular bar having width twice the depth is used as a beam. The beam is made of mild steel material having elastic modulus of 2.1 x 105 N/mm? and it undergoes bending by external load which makes radius of curvature of 150 m. If the allowable bending stress in the beam is to be limited to 100 MN/m. find the cross section of the beam.
A beam is subjected to equal bending moments of M, = 3000 N-m. The cross-sectional dimensions areb = 190 mm, c = 30 mm, d = 73 mm, and t = 7 mm. Determine: (a) the centroid location (measured with respect to the bottom of the cross-section), the moment of inertia about the z axis, and the controlling section modulus about the z axis. (b) the bending stress at point H. Tensile stress is positive, while compressive stress is negative. (c) the bending stress at point K. Tensile stress is positive, while compressive stress is negative. (d) the maximum bending stress produced in the cross section. Tensile stress is positive, while compressive stress is negative. M, M2 H d (typ) K b Answer: (a) y= mm 1z = i mm4 S= i mm3 (b) ƠH = MPа ( c) σκ-1 MPа (d) Omax= MPa