Please give me correct solution. Question 12You are protecting an 8 bit payload using a CRC error detection scheme and you are tryingto decide between two generator polynomials. The first generator is degree 3 and the secondis degree 4. Compare how many terabytes will slip through before we miss an error patternfor these two design choices. Assume a probability of bit error equal to p=1e-4. Feel free towrite a short computer script to answer this problem if you want.

Question 12 You are protecting an 8 bit payload using a CRC error detection scheme and you are tryin to decide between two generator polynomials. The first generator is degree 3 and the secon is degree 4. Compare how many terabytes will slip through before we miss an error patter for these two design choices. Assume a probability of bit error equal to p-le-4. Feel free t write a short computer script to answer this problem if you want.

Question 12 You are protecting an 8 bit payload using a CRC error detection scheme and you are tryin to decide between two generator polynomials. The first generator is degree 3 and the secon is degree 4. Compare how many terabytes will slip through before we miss an error patter for these two design choices. Assume a probability of bit error equal to p-le-4. Feel free t write a short computer script to answer this problem if you want.

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

A common measure of transmission for digital data is the baud rate, defined as the numberof bits transmitted per second. Generally, transmission is accomplished in packets consisting ofa start bit, a byte of information, and a stop bit. Using these facts, answer the following: How many minutes would it take to transmit a 640 x 480 px color image with eachchannel having 256 gray levels using a 10 Mbps modem?
If an error happened in the following scenario, please mention whether it occurred. The sender sends the number “001011010” to the recipient. The devices make use of odd parity, 8-bit data, and a 1-bit (LSB) parity for each bit of information. What happens if the devices are utilizing even parity instead than odd? What are the communication protocols that are utilized in TESLA automobiles? Insert the schematic of the one(s) that you have discovered.
Consider a full-duplex 256 Kbps satellite link with a 240 millisecond end-to-end delay. The data frames carry a useful payload of size 12,000 bits. Assume that both ACK and data frames have 320 bits of header information, and that ACK frames carry no data. What is the effective data throughput When using Stop and Wait?
In a transmission, digital data of 1 10110101011 will be transmitted a. CRC algorithm will be used for error detection. By using generating polynom G(x) = x^3+1, FCS(error control) bits are calculated and added to above data. Altough some of data bits are changed during signal transmission receiver could not detect the error. In this situation, at least how many bits might be changed? Why? Give an example. b. For error detection 2D Parity is used. During the transmission if underscored bits are changed, can the receiver detect the error with column parities?(consider 4 columns and 3 rows)
In a transmission, digital data of 110110101 will be transmitted. CRC algorithm will be used for error detection. By using generating polynom G(x) = x + 1, FCS (error control) bits are calculated and added to above data. Although some of data bits are changed during signal transmission receiver could not detect the error. In this situation, at least how many bits might be changed? Why? Give an example. a. b. For error detection 2D Parity is used. During the transmission if underscored bits are changed, can the receiver detect the error with column parities?
MAC address of a device is represented using Hexadecimal number. A section of MAC address is given in the following format: [Last 3 digits of your registration number]. You are asked to sketch the given MAC data using polar signaling and pseudo-ternary signaling. COMPARE the characteristics of waveforms and conclude that which of the waveforms is NRZ and RZ. Write proper justification of your answer. Reg three digits: 031
The received 7 x 5 message block shown below uses odd paritychecks, with the parity bits displayed at the end of each row (A–E) and column (1–7), in the shaded cells (see Section 3.7.1). By respectively checking each row and column determine the following: The row-column grid reference of the single error-bit. What change needs to be made to correct the error? As part of your answer, briefly explain how you located the error-bit. 1 2 3 4 5 6 7 A 1 1 1 1 1 1 1 0 B 1 1 0 1 0 0 0 0 C 1 0 1 1 0 1 0 1 D 0 0 0 1 1 0 1 0 E 1 1 1 0 0 1 0 0 1 1 0 1 1 0 1 1
Please check my answer and correct the part which is need to be foxed.And provide justification for the answer. a) The transmission time of a frame can be calculated as follows: Propagation delay (Tp) = distance/speed = 5km / 200000 km/s = 0.0025ms Transmission time (Tt) = frame size/bandwidth = 10000 * 8bits / (1Mbps * 10 ^ 6) = 0.008sec = 8ms Total time for transmission = 2 * Tp + Tt(since the frame has to travel from A to D and then D to A) = 2 * 0.0025ms + 8ms = 0.005ms + 8ms = 8.005ms The transmission time of the frame from A to D is 8.005 ms. b) The efficiency of the CSMA/CD protocol is given by the formula: Tt is the transmission time of a frame C is the number of collisions, Tp is the propagation time of a signal from one end of the segment to the other. Efficiency = Tt / (C * 2 * Tp + Tt + Tp) Assuming that there are no other stations transmitting or attempting to transmit on the segment, the transmission from A to D will succeed without collisions. Therefore,…
If 7 bits of data are sent between UARTS using even parity and 3 data bits are set to 1 and 4 data bits are set to 0, what is the value of the parity bit? Not enough information. 1 It doesn't matter, parity is optional.
The probability that a single bit will be in error on a typical public telephone line using 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error rate for a communication line using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above
Q2/ The following data stream (10011011 11001110 11110000 10001000 11100000 11011010 11111111 _01110111 10011001 11100111 01011010) will be transmitted with signaling rate equal to 80 k bit/sec. 2- Find the Hamming code of the last byte of the data only in which two error can be detected and one error can be corrected, calculate the transmitted bandwidth? how can reduce the transmitted bandwidth? Explain and calculate the reduced transmitted bandwidth?
Q2/ The following data stream (10011011 11001110 11110000 10001000 11100000 11011010 11111111 01110111 10011001 11100111 01011010) will be transmitted with signaling rate equal to 80 k bit/sec. 2- Find the Hamming code of the last byte of the data only in which two error can be detected and one error can be corrected, calculate the transmitted bandwidth? how can reduce the transmitted bandwidth? Explain and calculate the reduced transmitted bandwidth? 3- By using the following polynomial calculate the data transmitted of the (first byte of the data only) (p= x5 +x3 +x+l).