= 0.54759.6Scanned by CamScanner938 Power Plant Engineering16 km. The efficiencies of turbine and generator are 93% each. The density oswater is 1025 kg/m³. Calculate (a) the quantity of water flowing through cturbine at maximum output in m/s,(b) the surface area of reservoir in km²,(c) the wash behind the embankment at full reservoir capacity,(d) energy produced in TWh per year.(1 TWh (tera-watt hour) = 10° GWh= 10° MWh= 10° kWh=10'² Wh=3.6× 10!5 ,%3D%3D%3D

The given problem relates to power generation through tidal energy. There are 140 generators which…

ter is 1025 kg/m³. Calculate (a) the quantity of water flowing through each A tidal km. The efficiencies of turbine and generator are 93% each. The density of sea perates at a maximum designed head of eration is 2 m. The number of hours of generation is on the average ycle (12 hours a day). Assume power to decrease linearly and the a rectangular cross-sectional area. The length of embankment is Scanned by CamScann Power Plant Engineering km. The efficiencies of turbine and generator are 93% each. The density of ter is 1025 kg/m'. Calculate (a) the quantity of water flowing through c bine at maximum output in m/s,

ter is 1025 kg/m³. Calculate (a) the quantity of water flowing through each A tidal km. The efficiencies of turbine and generator are 93% each. The density of sea perates at a maximum designed head of eration is 2 m. The number of hours of generation is on the average ycle (12 hours a day). Assume power to decrease linearly and the a rectangular cross-sectional area. The length of embankment is Scanned by CamScann Power Plant Engineering km. The efficiencies of turbine and generator are 93% each. The density of ter is 1025 kg/m'. Calculate (a) the quantity of water flowing through c bine at maximum output in m/s,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The proposed hydroelectric power plant has the following data: Normal head water surface, 197 m, Normal tail water surface, 35 m, Loss of head due to friction, 5% of the gross head, Turbine discharge at full gate opening, 70 m 3 /s, Turbine Efficiency, 90 %, Variation in head, 5 m. Three turbines are to be installed with one twice the capacity of each of the other two similar units all having the same efficiency. Determine: The type of turbine to be used. The capacity of each turbine.
A hydro - electric power station has a reservoir of area 2.4 square kilometres and capacity 5x10°m.The effective head of water is 100 m. The penstock, turbine and generator efficiencies are 95%, 90%, and 85% respectively. (i)Calculate the total energy in kWh which can be generated from the power station. (ii)If a load of 15,000 kW has been supplied for 3 hours, find the fall in reservoir level.
A turbine of Kaplan type operates under a dam on height of 30m, the discharge of water equal to 180m3/sec. the efficiency overall is 92%. Calculates the power produced by this turbine.
A hydro electric plant having 30 sq. km reservoir area and 100 m head is used to generate power. The energy utilized by theconsumers whose load is connected to the power plant during a five-hour period is 13.5 x 106kwh. The overall generation efficiency is75%. Find the fall in the height of water in the reservoir after the 5-hour period.a. 5.13 mb. 1.32 mc. 3.21md. 2.20 m*
What is the turbine output of 100m head and delivering 1 cu. m/ sec in a hydro electric power plant if turbine efficiency is 88%?
Data from a certain hydroelectric power plant that uses Francis turbines are as follows: head water elevation of 60 m; tail water elevation of 15 m; head losses thru penstock of about 3 m; flow thru penstock at 3 cumex; hydraulic efficiency of turbine at 97%; mechanical efficiency of turbine at 96%; volumetric efficiency of turbine at 98%; and generator efficiency of 96%. Calculate the electrical power generated in kW.
A remote community in Marikina plans to put up a small hydro-electric plant to service six closely located barangays estimated to consume 52,650,000 KW-hrs per annum. Expected flow if water is 1665 m³/min. The most favorable location for the plant fixes the tail water level at 480 m. The manufacturer of turbine generator set have indicated the following performance data: turbine efficiency 87%; generator efficiency is 92%; loss in head work not exceed 3.8% of available head. In order to pinpoint the most suitable area for the dam, determine the head water elevation in m.
A tidal power plant of single basin type, has a basin area of 25 x 10 to power 6 m2. The tide has a range of 10m. The turbine however, stops operating when the head on it falls below 2 m. Calculate the energy generated in one filling process, in KWh if the turbine generator efficiency is 75%. (Density of sea water = 1025 kg/m2)
15. Refer to the figure below. In a hydroelectric power plant, 70m³/s of water (p = 1010kg/m³) flows from an elevation of 125m to a turbine, where electric power is generated. The overall efficiency of the turbine-generator is 84% (16% of total energy was lost). Disregarding frictional losses in piping, estimate the electric power output of this plant. 70mis 125m Turbine Generator utine p 84% Refer to Problem 15
Maximizing the wind velocity of 92 m/s and 25 units of wind turbine was installed at the seaside shore. What is the total power if the area of turbine blade equal to 42 sq.m. with air density of 1.2041 Kg/cu.m. A 1.969 MW 1,968,998 Watts 4,923 watts D 49.23 MW
Q2. Assume the pump has the performance plotted in Figure Q7 Efficiency (%) 100 80 60 40 20 C Total head (ft) 200,60 45 150 Head 100 30 50 15 0 0 Efficiency 500 2000 Power 1000 4000 1500 2000 kW 60 45 30 15 2500 (gal/min) 8000 10000 (l/min) hp 80 T T 60 40 20 6000 Pump capacity Figure Q2 Assume the pump was operating at a rotational speed of 1750 rpm for water y = 9810 N/m^3 and that the impeller diameter was 330 mm. The power required for this pump is 37 KW and the total head is 40 m. find the performance of pump at a speed of 1250 rpm. Where 1 m^3-1000 L. Power
A centrifugal pump operating under steady flow conditions delivers 2285 kg/min of water from an initial pressure of 82720 Pa to a final pressure of 275840 Pa. The diameter of the inlet pipe to the pump is 15.20 cm and the diameter of the discharge pipe is 10.5cm. What is the work in kW? [Pwater=1000 kg/m³]