The pressure in a natural gas pipeline is measured by the manometer shown in the figure with one of the arms open to the atmosphere where the local atmospheric pressure is 14 psia. Determine the absolute pressure at the bottom of the natural gas pipeline. Take the density of water to be pw = 62.4 lbm/ft3. Specific gravity of mercury is 13.6, and its density is pHg = 848.6 lbm/ft³. Specific gravity of oil is given to be 0.69, and its density is Poil = 43.1 lbm/ft³ Natural Gas 14 in 6 in -Mercury SG= 13.6 -Oil 2 in 22 in -Water The absolute pressure at the bottom of the natural gas pipeline is psia.

The pressure in a natural gas pipeline is measured by the manometer shown in the figure with one of the arms open to the atmosphere where the local atmospheric pressure is 14 psia. Determine the absolute pressure at the bottom of the natural gas pipeline. Take the density of water to be pw = 62.4 lbm/ft3. Specific gravity of mercury is 13.6, and its density is pHg = 848.6 lbm/ft³. Specific gravity of oil is given to be 0.69, and its density is Poil = 43.1 lbm/ft³ Natural Gas 14 in 6 in -Mercury SG= 13.6 -Oil 2 in 22 in -Water The absolute pressure at the bottom of the natural gas pipeline is psia.

Name: The pressure in a natural gas pipeline is measured by the manometer s
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The pressure in a natural gas pipeline is measured by the manometer shown in the figure with one of the arms open to theatmosphere where the local atmospheric pressure is 14 psia. Determine the absolute pressure at the bottom of the natural gaspipel

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

As shown in the figure, an inclined manometer is used to measure the pressure of the gas within the reservoir. The manometer fluid is mercury, which has a density of 845 lb/ft³. The manometer fluid rises a distance d = 5 inches along the manometer tube, which is inclined = 20° from the horizontal. The atmospheric pressure is 14.7 lbf/in² and the acceleration of gravity is 32.2 ft/s². Gas reservoir Mercury (p = 845 lb/ft³) Determine the gas pressure, in lbf/in². Express the pressure as a gage or a vacuum pressure, as appropriate, in lbf/in². Patm = 14.7 lbf/in.² g=32.2 ft/s² 20 in.
As shown in the figure, an inclined manometer is used to measure the pressure of the gas within the reservoir. The manometer fluid is mercury, which has a density of 845 Ib/ft3. The manometer fluid rises a distance d = 12 inches along the manometer tube, which is inclined e = 20° from the horizontal. The atmospheric pressure is 14.7 Ibf/in? and the acceleration of gravity is 32.2 ft/s?. Patm = 14.7 Ibf/in.? Gas reservoir g = 32.2 ft/s? a 20 in. Mercury (p = 845 Ib/ft³) Determine the gas pressure, in Ibf/in?. Express the pressure as a gage or a vacuum pressure, as appropriate, in Ibf/in2.
Air 6 cm The pressure in a natural gas pipeline is measured by the manometer shown in the figure with one of the arms open to the atmosphere where the local atmospheric pressure is 89kPa. Determine the absolute pressure in the pipeline. (Natural 29 cm gas 50 cm 15 cm -Mercury SG = 13.6 - Water
As shown in the figure, an inclined manometer is used to measure the pressure of the gas within the reservoir. The manometer fluid is mercury, which has a density of 845 lb/ft³. The manometer fluid rises a distance d = 5 inches along the manometer tube, which is inclined 0 = 20° from the horizontal. The atmospheric pressure is 14.7 lbf/in² and the acceleration of gravity is 32.2 ft/s². Gas reservoir a 8 Mercury (p = 845 lb/ft³) Determine the gas pressure, in lbf/in². Express the pressure as a gage or a vacuum pressure, as appropriate, in lbf/in². Patm = 14.7 lbf/in.² g= 32.2 ft/s² 20 in.
The pressure of the natural gas installation is as follows.As you can see, mercury (mercury), oil (oil) and water (water) fluidsIt is measured with a manometer. Open end of the manometer (X + 85)It is under the influence of kPa ambient pressure. The relative content of mercury and oil (relative to water)density (SG) and density of water (ρwater = 997 kg / m3) is known.Determine the absolute pressure in the installation (X=00)
Consider a U-tube manometer used to measure the density Pa of liquid A, as shown below. Mercury is used as the base liquid for the manometer with density Phg = 13600kg/m³. If hng = 5mm and ha = 22.4 mm, find Pa. ha Pa U Phg hng
A multifluid container is connected to a U-tube, as shown in the figure. For the given specific gravitles and fluid column heights. determine the gage pressure at A. Also determine the height of a mercury column that would create the same pressure at A. The column heighth of oil is 86 cm. The specific gravitles are 1.26 for glycerin and 0.90 for oll. We take the standard density of water to be Pw=1000 kg/m³ and the specific gravity of mercury to be 13.6. h 35 cm 18 cm Į Oil SG-0.90 Water Glycerin SG-1.26 90 cm 15 cm The gage pressure at A is kPa. The height of a mercury column that would create the same pressure at A is cm.
Consider the manometer shown in the figure. If the specific weight of fluid B is 70 kN/m³, what is the absolute pressure, in kPa, indicated by the manometer when the local atmospheric pressure is 720 mmHg?
The basic barometer can be used as an altitude measuring device in airplanes. The ground control reports a barometric reading of 753mmHg while the pilot's reading is 690mmHg. Estimate the altitude of the plane from ground level if the average air density is 1.20 kg.m-3 and the barometer fluid is mercury, PHg=13600 kg.m3. To solve this problem determine the atmospheric pressure on the ground and then in the air using the barometric pressure readings. Then using the pressure difference between the ground and the plane, the altitude can be derived by considering a column of air from the ground up to the plane, of constant density, in a similar manner to the barometer. [h=714m]
A simple manometer is used to measure pressure of oil (s= 0.8) flowing in a pipe line. Its right limb is open to the atmosphere and the left limb is connected to the pipe. The cente of the pipe is 9 cm below the level of mercury (s=13.6) in the right limb. If the difference of mercury level in the two limbs is 15 cm, determine the absolute pressure of the oil in the pipe in kPa. a.25.11 b.120.58 c.278.6 d.64.74
The water in a tank is pressurized by air, and the pressure is measured by a multifluid manometer as shown in Figure. The tank is located on a mountain at an altitude of 1400 m where the atmospheric pressure is 100 kPa. Determine the air pressure in the tank if h7 = 0.1 m, h2 =0.2 m, and h3 =0.35 m. Take the densities of water, oil, and mercury to be 1000 kg/m3, 850 kg/m³, and 13,600 kg/m3, respectively. %3D
A water pipe is connected to a double-U manometer as shown in Figure below at a location where the local atmospheric pressure is 97.9 KPa. Determine the absolute pressure at the center of the pipe. Oil SG = 0.80 Oil SG= 0.80 20 cm Water 30 cm pipe 60 cm 25 cm `Mercury SG = 13.6