The walls of the flat furnace are connected by two insulating layers A and B. The temperature of the insulating layer A facing the inside of the Furnace is 800°C and the temperature of the outside air is 60°C. Find the temperature of the interface between the two insulation layers when the thickness of insulation layer A is 150 mm, its thermal conductivity is 0.05 W/m℃, the thickness of insulation layer B is 240 mm, and its thermal conductivity is 0.15 W/m℃

The walls of the flat furnace are connected by two insulating layers A and B. The temperature of the insulating layer A facing the inside of the Furnace is 800°C and the temperature of the outside air is 60°C. Find the temperature of the interface between the two insulation layers when the thickness of insulation layer A is 150 mm, its thermal conductivity is 0.05 W/m℃, the thickness of insulation layer B is 240 mm, and its thermal conductivity is 0.15 W/m℃

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.40P: As a designer working for a major electric appliance manufacturer, you are required to estimate the...

See similar textbooks

Similar questions

The section of a vertical wall is made up of fiberglass insulation slabs separated by wooden studs. The thermal conductivity of fiberglass and wood are 0.04 W/m∙K and 0.18 W/m∙K, respectively. The thickness of the wall is 180 mm. The temperatures of the inner and outer surfaces of the wall section are 23.5 °C and 4.7 °C, respectively. The ratio of the insulation area to the total wall area is 0.8. Calculate the total heat flow rate (in W/m2) through the wall per unit area.
20-m pipe has an outside diameter of 50 mm. Pipe is insulated with a layer of asbestos, then followed by a layer of cork. Inside and outside diameter of the cork is 77 mm and 80 mm, respectively. If the temperature drop from pipe to cork is 1165°C, calculate the inside diameter of the pipe (mm). The rate of the heat transfer is 8778 W. The thermal conductivity of steam pipe, asbestos and cork are 0.045 kW/m-K, 0.058 W/m-K and 0.043 W/m-K respectively.
2. A refrigerated cold room wall has a thickness of 100mm and a thermal conductivity 0.14 W/m-K. The room wall has a 60mm thick internal lining of cork having a thermal conductivity of 0.05 W/m.K. The thermal conductance between the exposed faces and the respective atmosphere is 12 W/m²-K. If the room is maintained at 0°C and the external atmospheric temperature is 20°C, Calculate the heat loss rate through 1m² of the wall.
QUESTION 2 The wall of a refrigerated truck consists of 1.5mm sheet steel outer surface, 10mm plywood at the inner surface and 20mm of glass wool in between. The inside temperature is -15°C and outside temperature is 240C. Take the thermal conductivities of the materials as follows: - 0,052W/mK = 23,2W/mK k for glass-wool = 0,14W/mK k for plywood k for steel %3D %3D %3D Calculate: 2.1. the rate of heat flow per unit area; 2.2. the interface temperature. If the glass-wool is replaced by a 5mm cork board with a thermal conductivity of 0.043W/mK; 2.3. What percentage change in heat flow is obtained? 2.4. What must be the thickness of the cork board be, to achieve the same heat flow as in (2.1.).
4. The section of a vertical wall is made up of fiberglass insulation slabs separated by wooden studs. The thermal conductivity of fiberglass and wood are 0.04 W/m-K and 0.18 W/m-K, respectively. The thickness of the wall is 160 mm. The temperatures of the inner and outer surfaces of the wall section are 22 °C and 4 °C, respectively. The ratio of the insulation area to the total wall area is 0.8. Calculate the total heat flow rate (in W/m2) through the wall per unit area. Wooden Stud Fiberglass Insulation Follow-up question to Question 4, calculate the rate of heat flow (in W/m2) through unit area of studs.
A composite wall layer consists of layer A covered by layer B. The thermal resistance of layer A is 0.75 °C/W and the thermal resistance of layer B is 2.50 °C/W. The exposed surface of layer A is at a temperature of 60°C. If the heat transfer per unit area across the composite wall is 30 W/m?, what is the temperature at the interface between layer A and layer B? Express your answer in °C.
A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.13 m2 and whose thickness is 8 mm. Treat the wall as a slab of the insulating material Styrofoam whose area and thickness are 19 m2 and 0.10 m, respectively. Heat is lost via conduction through the wall and the window. The temperature difference between the inside and outside is the same for the wall and the window. Of the total heat lost by the wall and the window, what is the percentage lost by the window?
2. A glass window has an area of 5.5 ft² and a thickness of 5 mm. If one side is at a temperature of 45° F and the other is at 23 F, how much thermal energy (BTU/year) flows through the window in one year? The thermal conductivity of glass is 1.89x10-4 kcal/m-s-K.
1.A carpenter builds an exterior house wall with a layer of wood 3.0 cm thick on the outside and a layer of Styrofoam insulation 2.2 cm thick on the inside wall surface. The wood has a thermal conductivity of 0.080 W/(m⋅K), and the Styrofoam has a thermal conductivity of 0.010 W/(m⋅K). The interior surface temperature is 19.0°C, and the exterior surface temperature is −10.0°C. (a) What is the temperature at the plane where the wood meets the Styrofoam? (b) What is the rate of heat flow per square meter through this wall?
1. A pipe is covered with three insulation layers where the corresponding thicknesses are 150 mm, 250mm and 300mm and the respective thermal conductivities are 3.2 W/m°C, 2.1 W/m°C and 1.5 W/m C. The length of the pipe is 3m. The inner side of the pipe which has a diameter of 300 mm is exposed to a hot gas at 1000 °C with convection coefficient of 50 W/m2°C and the temperature of the inner side of the pipe surface is 800 °C. The air outside the pipe is at 25°C with a convection coefficient of 35 W/m2°C. a. Draw a schematic diagram which shows the heat transfer process b. Calculate the Heat transfer rate c. The overall heat transfer coefficient "U" of the system based on the inner pipe d. Temperature at each of the layers and at the outermost surface of the pipe.
A pipe of length L connects to thermal reservoirs that are kept constant at temperatures T₁ and T₂. The pipe contains a gas with a thermal conductivity K, a density p, and a heat capacity cp. What is the temperature T of the gas in the tube at a distance x = 0.2L away from the thermal reservoir with temperature T₁ ? Select one: a. b. T = 0.5(T₁+T₂) T = T₁ +0.2 (T₂-T₁) c. T = T₁ +0.2(T₂-T₁) d. T = T₁ +0.2(T₁ - T₂)
A steel pipe (outside diameter 100 mm) is covered with two layers of insulation. The inside layer, 40 mm thick, has a thermal conductivity of 0.07 W/(m K). The outside layer, 20 mm thick, has a thermal conductivity of 0.15 W/(m K). The pipe is used to convey steam at a pressure of 600 kPa. The outside temperature of insulation is 24°C. If the pipe is 10 m long, determine the following, assuming the resistance to conductive heat transfer in steel pipe and convective resistance on the steam side are negligible: a. The heat loss per hour. b. The interface temperature of insulation.