Using a pallet jack with the handle acting as the shaft, using the FBD below, what equations would be used to find the maximum load, the bending moment, torsion moment, ultimate strength, and yield strength?

Give an example of how to apply discontinuity functions to describe the loading or internal moment?

Bolts distributed about a bolt circle are often called upon to resist an external bending moment as shown in the figure. The external moment is 19 kip-in and the bolt circle has a diameter of 15 in. The neutral axis for bending is a diameter of the bolt circle. What needs to be determined is the most severe external load seen by a bolt in the assembly. M Neutral axis R NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. View the effect of the bolts as placing a line load around the bolt circle whose intensity FÅ, in pounds per inch, varies linearly with the distance from the neutral axis according to the relation Fb Fb,max R sin 8. The load on any particular bolt can be viewed as the effect of the line load over the arc associated with the bolt. For example, there are 12 bolts shown in the figure. Thus, each bolt load is assumed to be distributed on a 30° arc of the bolt circle. Under these conditions, what is the largest bolt…

The following assumptions were used in deriving the flexural stress formula, except? Select one: O a. Elastic behavior O b. Large deflections c. Small strain O d. Plane sections before bending remain plane after bending