Solve all partsPlease help me with complete solution Water at 20°C flows through the elbow shown in Figure QA3, and exits to the atmosphere throughthe nozzle at station 2. The pipe diameter is Di= 10 cm while D2= 3cm. At a weight flow rate of150 N/s, the gauge pressure of water at station O is p, = 2.3 x 10 Pa.%3D(a) What is the mass flow rate of water ?(b) What is the water velocity at station 0 and station 2?() Neglecting the weight of water and elbow, estimate the horizontal component of force that isexerted by water on the elbow.p= pgh40°(2

Answered: Image /qna-images/answer/4011866c-3bae-4733-bdfd-e659f8622482.jpg

Water at 20°C flows through the elbow shown in Figure QA3, and exits to the atmosphere through the nozzle at station 2. The pipe diameter is Di- 10 cm while D2= 3cm. At a weight flow rate of 150 N/s, the gauge pressure of water at station 0 is pi = 2.3 x 10 Pa. %3D (a) What is the mass flow rate of water ? (b) What is the water velocity at station O and station 2? (c) Neglecting the weight of water and elbow, estimate the horizontal component of force that is exerted by water on the elbow. 1 p= pgh 40° (2

Water at 20°C flows through the elbow shown in Figure QA3, and exits to the atmosphere through the nozzle at station 2. The pipe diameter is Di- 10 cm while D2= 3cm. At a weight flow rate of 150 N/s, the gauge pressure of water at station 0 is pi = 2.3 x 10 Pa. %3D (a) What is the mass flow rate of water ? (b) What is the water velocity at station O and station 2? (c) Neglecting the weight of water and elbow, estimate the horizontal component of force that is exerted by water on the elbow. 1 p= pgh 40° (2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Please show your complete solution. Thank you! Air flows in a steady flow manner through a converging tube. At the inlet the pressure is 690kPaabs and the density is 0.838 kg/cu.m. If air enters with a volume flow of 125 cu.m per min at the rate of 94 m/min and the exit section has a diameter of 350mm, determine a.) the mass flow rate, kg/min b.) the diameter of the entrance section and c.) the exit velocity. Assume that the density is constant.
dp 1. It shows that the behavior of fluid is A From the equation stated, show the formula for mass flow rate AVp = c. :C.
2. A fan discharges 265 cu.m/min of air through a duct of 92 cm in diameter against a static pressure of 0.022 m of water. The fluid density is 995 kg/cu.m., the air temperature is 29°C and the barometric pressure reading is 730 mm Hg. If the power input to the fan is measured 3.5 hp, what are the total and static fan efficiencies?
Qn.2. A piezometer and a Pitot tube are tapped into a horizontal water pipe, as shown in the Figure I below to measure static and stagnation (static + dynamic) pressures. For the indicated water column heights, determine the velocity at the center of the pipe. Clearly state all asuumptions and illustrations. hy-12 cm h- 7 cm hy-3 cm Water Stagnation point Figure 1
• A 50 litre tank takes 4 minutes to fill with petrol (density 733 kg/m3 ) through a nozzle of diameter 15 mm. What is the mass flowrate of petrol into the tank? What is the mean velocity of petrol leaving the nozzle?
Water from a large reservoir drives a turbine, and exits as a free jet from a pipe of diameter D. The jet is deflected by a vane, and the horizontal force required to hold the vane is F directed to the left. Given: h = 40m, D = 0.15m, 0 = 30°, F, = 1500N, and Pw = 1000 kg/m³. Assume velocity magnitude at exit of vane is equal to that at entrance. If all losses are negligible, calculate: (a) The power developed by the turbine in kW. (b) The pressure difference across the turbine, and express it as a head (m). h Figure 1: Problem 2, A sketch (not-to-scale) Equations used must be labeled appropriately: conservation of mass, principle of linear momentum, principle of angular momentum, or first law of thermodynamics. Control volumes must be drown and clearly defined. List all assumptions.
As shown in figure Q1, air flows through a converging nozzle from a large tank and into a receiver. At section 1, the temperature is 350 k, the pressure is 320 kPa (abs), and the flow the flow area is 0.40 m?. The pressure in the large tank is 360 kPa (abs). Nozzle exit area is 0.30 m?. Air flow is assumed to be steady and isentropic in the converging nozzle. Express answer at least 3 significant figures. Take K as 1.40 and R as 0.287 kJ/kg.K Determine: a) The mach number at Section 1. b) The mach number, pressure and velocity at the exit. c) The mass flow rate through the nozzle. Large Tank Pressure = 360 kPa (abs) Air flows Nozzle Exit
A wind tunnel has an incompressible flow of air, flowing horizontally from an inlet section, 7 times the test section. A u-tube is connected, containing mercury inside. The mercury has 1.33x10^5 N/m^3 specific weight. The condition of the air at the inlet section is at 1 atm and 280K respectively. What is the change of height inside the mercury, when the velocity at the throat is 70m/s?
Suppose that you are willing to determine the diameter of the water jet impinging to the sink from the kitchen tap.The tap is produced to supply three different flow rates of the low, medium, and high. For each flow rate level, waterthat comes from the tap fills the beaker with a volume of 30 mL in 10 s, 6 s, and 2 s, respectively. The outlet of the tapis 13 mm, and the distance between the tap outlet and the sink is 53 mm. Determine the diameters of the water jetimpinging on the sink at three given flow rates.
! MIN 1/1 米 4:22 PM O O 81% Find a relation between nozzle discharge velocity V2 and tank free surface height h as in figure below. Assume steady frictionless flow. HGL - II Open jet:
In the diesel engine experiment, if: engine speed= 1302 Torque (N.m) = 9.9 Power(W)= 1344 Air mass flow rate (Kg/sec) = 0.002178 fuel mass flow rate (Kg/sec) = 0.000140 Tamb (C)= 20.1 Texh (C)= 292 Pamb (mbar)= 929 Air box Pressure (Pa)= -82 The Volumetric efficiency will be: Select one: a. 84.89% O b. 78.33% O c. 65.27% O d. 71.86%
Q1: A water tower is an elevated structure supporting a water tank constructed at a height sufficient to pressurize a distribution system for potable water. A completely filled and pressurized water tank was found with a small leakage (a hole 5cm in diameter) located on the sidewall of the tank, around 5 meters below the top of the tank. Please calculate the velocity of leakage water that discharges to the normal atmosphere. The dimension of the tank is 20-meter in height and 10-meter in diameter. The gauge pressure of the water tank top is 0.1M Pa. The Bernoulli equation is: P₁/pg + V₁²/2g +h₁ = P₂/pg + V₂²/2g +h₂ Gauge Pressure: 0.1 M Pa 5 meters Leakage velocity?