A unity feedback system has a plant G(s) with one pole and one zero, both at the left half of the s-plane. s+z s+p G(s) = z, p<0 The steady-state error of the step response is improved by increasing the system type to 1, by inserting an integrator as controller. Gc(s) = K S Regardless of the location of the plant pole and zero, the compensated system is always stable for all K > 0. Select one: O True O False It is possible for the compensated system to have a settling time that is longer compared to that of the uncompensated system. Select one: O True O False There is a combination of plant pole and zero where the response of the compensated system is overdamped for all values of K > 0. Select one: O True O False There is a combination of plant pole and zero where the system response is underdamped for all values of K > 0. Select one: O True O False The system type is further increased from 1 to 2 by adding another integrator to Ge(s). The response to a ramp input would yield zero error since the system is Type 2. This statement is only possible if the plant zero is to the right of the plant pole. O the plant zero is to the left of the plant pole.

A unity feedback system has a plant G(s) with one pole and one zero, both at the left half of the s-plane. s+z s+p G(s) = z, p<0 The steady-state error of the step response is improved by increasing the system type to 1, by inserting an integrator as controller. Gc(s) = K S Regardless of the location of the plant pole and zero, the compensated system is always stable for all K > 0. Select one: O True O False It is possible for the compensated system to have a settling time that is longer compared to that of the uncompensated system. Select one: O True O False There is a combination of plant pole and zero where the response of the compensated system is overdamped for all values of K > 0. Select one: O True O False There is a combination of plant pole and zero where the system response is underdamped for all values of K > 0. Select one: O True O False The system type is further increased from 1 to 2 by adding another integrator to Ge(s). The response to a ramp input would yield zero error since the system is Type 2. This statement is only possible if the plant zero is to the right of the plant pole. O the plant zero is to the left of the plant pole.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A unity feedback system has a forward path transfer function G(s)=16/(s2+8s). Find the value of delat time , rise time, percentage overshoot, peak time and settling time.
A feedback system root locus graph shown in figure below. For damped frequency 8.04 Hz, the gain K = 10 Imaginary Axis (seconds) ÖAN÷O-NWAGALBE -10 -20 -18 -16 Root Locus -14 -12 -10 -8 -6 -4 Real Axis (seconds) Ņ 0
For a lead compensator whose zero is (-2,0) is used in a feedback control system to provide a phase lead of 45 .for desired pole location (S1=-2+3.3j), that represents the design specifications, this compensators pole is at
Explain how the Nyquist stability criterion can be used to determine the stability of a closed-loop feedback system. Formulate the criterion for a system with no right-half plane open-loop poles. Q4 (a) Continued overleaf Page 4 of 10 (b) Consider the Nyquist plot of the frequency response of the system G(jw) = 500 - shown in Figure Q4 below. (jw+1)(jw+10)2 i. Explain how the gain margin can be obtained from the Nyquist plot and determine its approximate value from Figure Q4. What is the maximum value of an additional gain K for which the closed loop would still be stable? 0.5 -1 -1 -0.5 0.5 1 Real Axis Figure Q4 i. Explain how the phase margin can be obtained from the Nyquist plot and determine its approximate value from Figure Q4. Assuming that the corresponding point on the plot occurs at 4rad/s, what is the maximum delay which can be added to the system before the closed loop would become unstable? Sketch the approximate Bode diagram for the system in part (b) of the question,…
A unity feedback system has the characteristic equation shown below. For some gain K the unity feedback system enters into a state of self-sustained oscillations. Use the Routh - Hurwitz Stability Criterion to find the frequency of this self-sustained oscillation in rad/ sec. Enter your answer in decimal form to two decimal places. 4 + 65³ +12s² + 10s + (3+K)
HG(s) = QUESTION 6 s²+4s+5 Consider the root locus of a unity feedback system that has the open loop transfer function shown below. Find the break point. K(s+1) ² $3 HG(s) = AKI a... bmit. Click Save All Answers to save all answers.
Chose True or False * True False If a system is subjected to step input, the type of static error coefficient performs the function of controlling steady state error is position. If a type 1 system is subjected to parabolic input, the value of steady state error will be zero . The elements of rotational motion are the Mass, Spring, Friction. the notation represents the feedback path in closed loop system is c(t). The output signal is fed back at the input side from the Summing point. In an integral controller the output is proportional to integral of input. Two loops are said to be non- touching only if no common Branch exists between them. In block diagram representation, the lines connecting the blocks, known as branches. Order of the system can be determined from the e forward path transfer function of the system. A system with transfer function 1/Ts+1, subjected to a unit step input to reach 63.2% of final value, The value of t is T/2.
seels e A unity feedback system has G(s) as shown below in figure, what is the range K for * ?stability K(1+0.25)(1 +0.0255) () = 51+ 0.001 ) + 0,005 5) 600
A feedback system root locus graph shown in figure below. On the edge of stability, K= Root Locus 15 12 6. -9 -12 -15 -17 -15.3-13.6-11.9-10.2 -8.5 -6.8 -5.1-3.4 -1.7 0 1.7 3.4 5.1 6.8 8.5 10 Real Axis (seconds") Imaginary Axis (seconds)
QUESTION4 Consider the feedback system in the figure with G(s) Using the Ziegler-Nichols Oscillation Method. %3D (s+1)(s+3)(s+10) for an ideal PID controller C(s) - K, ++ Kps determine the gains K K, and K. Choose the closest set of gains. C(s) G(s) OK, - 18, K, = 12.81, K, = 6.32 O Kp = 4.80, K, = 2.65, Kp = 2.18 O Kp - 47.52, K, = 85.57, K, - 12.60 %3D O K, - 68.64, K, = 143.27, Kp = 8.22
The solution of characteristic equation are i.e 1+ G(s).H(s) = 0. O a. open loop poles O b. closed loop zeroes O c. open loop zeroes 1O d. closed loop poles and why? pls explain . A positive feedback system will have fast response with reduced oscillations. . False . True
how to find the closed loop poles and zeros on a tf like this by hand. With unity feedback.