Internal standard (As , Cs ), analyte with known concentration (Ax , Cx ) In a chromatographic equipment, a solution containing 0.006727 X and 0.008331 M S give peak area of Ax= 2316 and As= 207. To analyze an unknown sample, 5.0mL of 0.008331M S was added to 5.0mL of X, and the mixture was diluted to 50.0mL. This mixture gave a chromatography spectrum with area Ax= 3206 and As= 200. Find Cx.

Internal standard (As , Cs ), analyte with known concentration (Ax , Cx ) In a chromatographic equipment, a solution containing 0.006727 X and 0.008331 M S give peak area of Ax= 2316 and As= 207. To analyze an unknown sample, 5.0mL of 0.008331M S was added to 5.0mL of X, and the mixture was diluted to 50.0mL. This mixture gave a chromatography spectrum with area Ax= 3206 and As= 200. Find Cx.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter8: Sampling, Standardization, And Calibration

Section: Chapter Questions

Problem 8.16QAP

See similar textbooks

Similar questions

Internal standard. A solution containing 3.47 mM X (analyte) and 1.72 mM S (standard) gave peak areas of 3 473 and 10 222, respectively, in a chromatographic analysis. Then 1.00 mL of 8.47 mM S was added to 5.00 mL of unknown X, and the mixed solution was diluted to 10.0 mL. This solution gave peak areas of 5 428 and 4 431 for X and S, respectively. (a) Find the response factor for X relative to S in Equation 5-9. (b) Find [S] (mM) in the 10.0 mL of mixed solution. (c) Find [X] (mM) in the 10.0 mL of mixed solution.(d) Find [X] in the original unknown.
In a chromatography experiment, a solution containing 0.083 7 M X and 0.066 6 M S gave peak areas of AX = 423 and AS 5 347. (Areas are measured in arbitrary units by the instrument.) To analyze the unknown, 10.0 mL of 0.146 M S were added to 10.0 mL of unknown, and the mixture was diluted to 25.0 mL in a volumetric flask. This mixture gave the chromatogram in Figure 5-8, with peak areas AX = 553 and AS = 582. Find the concentration of X in the unknown.
Internal standard. A mixture containing 12.8 mM analyte (X) and 44.4 mM standard (S) gave chromatographic peak areas of 306 for X and 511 for S. A second solution containing an unknown quantity of X plus 55.5 mM S had peak areas of 251 for X and 563 for S. Find [X] in the second solution.
3c. A solution containing 2.50 mM X (analyte) and 1.20 mM S (standard) gave peak areas of 2509 and 7132 respectively, in a chromatographic analysis. Then, 1.00 mL of 6.00 mM S was added to 5.00 mL of unknown X and the mixture was diluted to 10.0 mL. This solution gave peak areas of 4016 and 3138 for X and S, respectively. Calculate i. the response factor for the analyte ii. the concentration of S (mM) in the 10.0 mL of mixed solutioniii. the concentration of X (mM) in the 10.0 mL of mixed solutioniv. the concentration of X in the original unknown solution
Consider the peaks for heptane (14.56 min) and p-difluorobenzene (14.77 min) in the chromatogram. The column is 30.0 m long. (a) Measure w1/2 for each peak and calculate the number of plates and the plate height for each. (b) From w1/2, compute w for each peak and find the resolution between the two peaks.
A solution with 0.083 7 M X and 0.050 0 M S9 gave areas AX = 423 and AS9 = 372. Then 10.0 mL of 0.05 0 M S9 plus 10.0 mL of unknown were diluted to 25.0 mL. The chromatogram gave AX = 553 and AS9 = 286. Find [X] in the unknown.
Q1: The following are relative peak areas for chromatograms of standard solutions of methyl vinyl ketone (MVK) MVK concentration mmol/L 0.5 Relative peak area 3.76 1.5 9.16 2.5 15.03 3.5 20.42 4.5 25.33 5.5 31.97 A sample containing MVK yielded relative peak area of 21.3. Calculate the concentration of MVK in the sample.(use excel)
A standard sample contains 15.0 mM of analyte and 25.0 mM of internal standard. The analysis of the standard sample gives peak areas for the analyte and internal standard of 1.782 and 3.539, respectively, in a chromatography analysis. Then sufficient internal standard is added to a sample to make its concentration 10.0 mM. The analysis of this new sample yields peak areas for the analyte and internal standard of 0.894 and 2.981, respectively. Name the calibration method and report the analyte's concentration in the new sample. (e)
The following data are from the HPLC assay of paracetamol 500 mg tablets using the calibration curve method: - Weight of active ingredient in powdered tablets taken for analysis: 180 mg • Initial extraction volume: 200 mL - Dilution steps: 10 mL into 100 mL, then 5 mL into 100 mL - Linear equation: y = 12000x - 50 %3! - Area of chromatographic peak for sample is 4750. What is the theoretical concentration in final solution in mg/100 mL? (2 decimal places). Please do not write the units, just numerical value. Answer:
percentage purity of an ibuprofen sample was determined by a reversed phase HPLC method as follows: Y Der ● A calibration curve of peak area versus concentration (ug/mL) of pure ibuprofen was constructed The ibuprofen sample for analysis was prepared by taking 10.0204 g of powder and dissolving it in/1Lbf distilled water (solution A). 1 ml of the latter solution was further diluted to IL with distilled water (solution B). Solution B was analysed by HPLC analysis Results The equation for the best-fit line of the calibration curve is: y=26820x-1323.8. ● The average peak area for the ibuprofen sample (solution B) was 266796.2 Calculate the percentage purity of the ibuprofen powder.
Analysis of an unknown plant extract yield two peaks X and Y in a chromatogram, 15.65 and 17.03 min respectively in a 30.0 cm column. The peak base width for X is 1.06 and 1.15 for Y. The average number of plates in the column is
A solution containing 2.30 mM of X (analyte) and 1.15 mM of S (standard) gave peak areas of 1728 and 6482, respectively, in a chromatographic analysis. Then, O.620 mL of 3.82 mM S was added to 2.75 mL of unknown X and the mixture was diluted to 10.0 mL. This solution gave peak areas 2501 and 2281 for X and S, respectively. Find the concentration of X in the original unknown.