The link shown, made of AISI C1045 steel, as rolled, is subjected to a tensile load of 8000 Ib. Let h = 1.5 b. If the load is repeated but not reversed, determine the dimensions of the section with the design based on (a) ultimate strength, (b) yield strength. (c) If this link, which is 15 in. long., must not elongate more than 0.005 in., what should be the dimensions of the cross section? For AISI C1045 steel, as rolled Su = 96 ksi, Sy = 59, ksi E = 30x10^6 PSI, Nu = factor of safety = 6 (for repeated but not reversed load) Ny = factor of safety = 3 (for repeated but not reversed load)

The link shown, made of AISI C1045 steel, as rolled, is subjected to a tensile load of 8000 Ib. Let h = 1.5 b. If the load is repeated but not reversed, determine the dimensions of the section with the design based on (a) ultimate strength, (b) yield strength. (c) If this link, which is 15 in. long., must not elongate more than 0.005 in., what should be the dimensions of the cross section? For AISI C1045 steel, as rolled Su = 96 ksi, Sy = 59, ksi E = 30x10^6 PSI, Nu = factor of safety = 6 (for repeated but not reversed load) Ny = factor of safety = 3 (for repeated but not reversed load)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Let's considera rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E= 200 Gpa and a Poisson's ratio of 0.3. If a tensile force Fis subjected to that rod cross-section, the diameter becomes 3.995 mm. determine the applied force F Select one: OF 5236 N O F=15708 N Clear mopshoe Finish attempt
A ¼ inch diameter steel rod is to carry an axial load of 2000 lbs. If the yield strength is 38 ksi, will the rod yield?
(a) A 25 mm diameter bar is subjected to an axial tensile load of 100KN. Under the action of this load a 200 mm gauge length is found to extend 0.19 x 10-mm. Determine the modulus of elasticity for the bar material. (b) If, in order to reduce weight whilst keeping the external diameter constant, the bar is bored axially to produce a cylinder of uniform thickness, what is the maximum diameter of bore possible given that the maximum allowable stress is 240 MN/mo? The load can be assumed to remain constant at 100kN. (c) What will be the change in the outside diameter of the bar under the limiting stress quoted in (b)? (E = 210 GN/m2 and 1 = 0.3).
Answers are already given. Kindly answer all the required forces. ANSWER: FFG=1103.7267 kip, T W= 832. 7498 kip, T Mc= 6272.9979 kip-ft, clockwise Cx= 0 Cy=1297.7498
A 12” X 16”simply supported pine wood beam is being considered to carry a uniform load distribution across a span of 12’ as shown. In addition to the uniform load, the beam is also subjected to a tensile load of 20 kips. If the ultimate tensile stress in pine wood is 4500 psi, determine whether the beam is considered safe according to the Allowable Stress Method, using a Factor of Safety 2.5. Hint: you can calculate the maximum tensile stress in the cross-section without having to use Mohr’s circle
Compound axial member ABC has a uniform diameter of d = 1.0 in. Segment (1) is an aluminum [E1 = 10,000 ksi] alloy and segment (2) is a copper [E2 = 17,000 ksi] alloy. The lengths of segments (1) and (2) are L1 = 66 in. and L2 = 110 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.45 in. L1 L2 (1) A d Aluminum (2) В Соpper Answer: kips P = i
5) A brass rod 8mm diameter and 400mm long fits centrally inside aluminum tube of the same length having an external diameter of 16mm and a wall thickness of 3mm. The rod and tube are rigidly connected at their ends so that they twist together when a torque of 20 Nm is applied. Galuminum = 30GPA; Gbrass = 40GPA. Determine: %3D a) The values of the torsional stiffness for the rod and the tube b) The torque transmitted by each c) The maximum shear stress in each d) The angle of twist
Compound axial member ABC has a uniform diameter of d-2.4 in. Segment (1) is an aluminum [E₁ - 10,000 ksi] alloy and segment (2) is a copper [E₂ - 17,000 ksi] alloy. The lengths of segments (1) and (2) are L₁ - 78 in. and L₂ - 150 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.35 in. L₁ A Part 1 Aluminum Answer: A- B Save for Later Calculate the cross-sectional area of the compound member. L2 (2) Copper in.² C P Attempts: 0 of 1 used Submit Answer Part 2 The parts of this question must be completed in order. This part will be available when you complete the part above. Part 3 The parts of this question must be completed in order. This part will be available when you complete the part above.
You are in charge of designing a new fixture for a “universal testing machine” that will attach a tensile specimen to the machine using a clevis—a U-shaped piece with holes drilled through the two arms—and a cylindrical pin that passes through the clevis and the specimen. If the maximum load exerted by the machine is 30 kN and the pin is to be made of some sort of steel, what is the minimum pin diameter needed to ensure that the shear stress in the pin does not exceed 600 MPa? Assume that the steel has similar elastic properties to pure Fe.
Compound axial member ABC has a uniform diameter of d = 2.9 in. Segment (1) is an aluminum [E₁ = 10,000 ksi] alloy and segment (2) is a copper [E₂ = 17,000 ksi] alloy. The lengths of segments (1) and (2) are L₁ = 80 in. and L₂ = 110 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.10 in. A Li (1) Aluminum B L2 (2) Copper
A 50' length of steel rail is laid on a day when the temperature is 30 °F. In order to prevent the rail from developing any internal stresses due to a thermal increase of 50 °F, what is the amount of deformation that needs to be accommodated with respect to the slotted connection at the rail end(s)? Steel rail L=60' Slotted hole Coeff. of Mod. of Mod. of Tensile Yield Thermal Ultimate Strength Expansion a in/in./F" x 10 Elasticity Rigidity G Strength Poisson's ksi Density pcf Ratio Material ksi ksi ksi Tens. Comp. Shear Steel ASTM A36 or 490 30,000 12,000 36 58 6.5 0.25 A501 Steel (high-strength low-alky) ASTM A992 490 30,000 12,000 50 65 6.5 0.25 Steel AISI 1020 490 30,000 11,500 30 55 6.5 0.25 hot-rolled Steel AISI 1040 490 30,000 11.500 42 76 6.5 0.25 hot-rolled Stainless steel (annealed) 490 29,000 11,600 40 85 60 6.5 0.25 Cast iron (gray) 490 15,000 6000 20 80 32 5.9 0.26 Aluminum allay 6061.16 165 10,000 4000 35 38 27 13.1 0.3 51-T6 Thanium alloy 275 16,500 6500 130 140 100 5.4…
Part A Direct tension indicators are sometimes used instead of torque wrenches to ensure that a bolt has a prescribed tension when used for connections. If a nut on the bolt is tightened so that the six 3-mm high heads of the indicator are strained 0.1 mm/mm, and leave a contact (Figure 1) area on each head of 1.5 mm“, determine the tension in the bolt shank. The material has the stress-strain diagram shown. (Figure 2) Express your answer to three significant figures and include appropriate units. HA ? Tigure 1 of 2 T = Value Units The unit you entered is not recognized. Review a list of acceptable units No credit lost. Try again. 3 mm Submit Previous Answers Request Answer < Return to Assignment Provide Feedback