Concept explainers
Classify the uncertainty associated with the following items as either aleatory or epistemic and explain your reason for your classification: average wind speed over a 30-day period, location of a certain applied load, change in strength of a soil caused by sampling method, capacity determined by a certain analysis method, magnitude of live load caused by vehicles traveling on a bridge, soil shear strength as measured by a certain method.
Whether the uncertainty associated with the given items is aleatory or epistemic.
Explanation of Solution
Introduction:
The uncertainty is categorized into two parts, that is, aleatory and epistemic. The aleatory uncertainties have inherent random nature. These can never be eliminated but can be reduced by increasing the number of samples.
The epistemic uncertainties arise due to the lack of complete knowledge of the processes or systems or due to errors made in the testing. These can be eliminated or reduced by acquiring better knowledge and improving the testing methods to reduce the errors.
The uncertainty in determining the average wind speed over a
The uncertainty in determining the location of a certain applied load is epistemic as the location of the applied load is not random, but the variation between the calculated value and the actual value will arise due to an error in conducting the tests or due to lack of sufficient knowledge of the system.
The uncertainty in the change in the strength of soil caused by the sampling method is aleatory as the soil’s strength keeps on varying.
The uncertainty in determining the capacity by a certain analysis method is epistemic as the uncertainty arises due to the lack of knowledge of the method to be used or due to the inaccurate testing. The uncertainty can be reduced by either accurately performing the test or by improving the knowledge of the method.
The uncertainty in determining the magnitude of the live load caused by vehicles traveling on a bridge is epistemic as the uncertainty can be reduced by performing the test correctly or by improving the information or knowledge of the process.
The uncertainty in determining the soil’s shear strength by a certain method is aleatory as the shear strength of the soil is random because it depends on various factors such as the nature of the soil and thus, it cannot be determined accurately even if the test is performed correctly.
Conclusion:
The types of uncertainties associated with the given items are mentioned above.
Want to see more full solutions like this?
Chapter 2 Solutions
Foundation Design: Principles and Practices (3rd Edition)
Additional Engineering Textbook Solutions
Materials for Civil and Construction Engineers (4th Edition)
Computer Systems: A Programmer's Perspective (3rd Edition)
Starting Out with C++ from Control Structures to Objects (8th Edition)
Automotive Technology: Principles, Diagnosis, And Service (6th Edition) (halderman Automotive Series)
C How to Program (8th Edition)
Applied Fluid Mechanics (7th Edition)
- Three samples of Soil were collected during soil exploration for the construction of a Highrise Building. a) Choose the most appropriate Test to determine shear strength parameters for each of the sample described as under i) Saturated Plastic Clay ii) Well Graded Sand iii) Silty Clay b) Draw typical graph between shear stress and normal stress for each of the sample described as above.arrow_forwardA plate-bearing test is performed on soil near the surface of a granular stratum in order to determine the modulus of vertical subgrade reaction. The load versus settlement information appears as a straight line on a graphical plot. At a point where the load is 5 tons/ft2, the indicated settlement is 0.5 in. What is the value for the modulus of vertical subgrade reaction?arrow_forwardwhat is the relationship between soil particle size and porosity? Answer in a complete sentarrow_forward
- A specific gravity test was performed on three soil samples, and the following data were collected: Material weight of empty pycnometer weigt of dry soil weight of weight of pycnometer pycnometer Temperature + water +water+soil g Sand 1 106.6 Sand 2 106.6 Sand 3 106.6 2-a) Briefly describe the test procedure and discuss its applications in practice 2-b) The corrected specific gravity of SAND 1 G5,20 2-c) The corrected specific gravity of SAND 2 G5,20 2-d) The corrected specific gravity of SAND 3 G5,20 55.4 50 60 === === g 385.5 371 392 351 340 355 с 18 24 20arrow_forwardInitiate Research on Effective Stress, Total Stress and Pore Water Pressure. Answer the following: 1. What is your understanding of "soil behaving as a homogenous and isotropic elastic body"? 2. What is the difference between normal stress and effective stress that is acting on soil grains?arrow_forwardAnalyze each statement (A and B) whether they are true or false. Use the choices below in answering each item; A statement A is true B statement B is true C both A and B are true D neither A nor B are true (A) As the soil becomes compacted, both bulk density and particle density increase. (B) Porosity is inversely proportional to bulk density, meaning as bulk density increases percent porosity decreases, and vice versa.arrow_forward
- Provide USCS classification for the soil shown on the GSC below. Your answer must contain the required information in the table provided below. Find % gravel = %sand = %fines = D60 = D30= D10= Cu = Cc= Whats is the USCS Symbol = ?arrow_forwardDescribe why effective stress is important when evaluating soil behavior. Please provide at least one example.arrow_forwardThree kinds of experiments for measuring soil permeability coefficientarrow_forward
- Discuss the importance of grain size analysis tests in soils? What is the practical applications of performing grain size analysis in engineering practice? Why do we need to use oven dried soil samples in grain size analysis test?arrow_forwardDescribe why effective stress is important when evaluating soil behavior. Please provide at least one example. (2-3 Sentences)arrow_forwardEngineering statistics, i need solutions in 15 minutes please. MCQ/The table below shows the results from the specific gravity (S.G.) test performed in a soil laboratory including twenty samples of sand. Determine the Coefficient of Quartile Variation. A-0.011 B-0.033 C-0.024 D-0.087 E-0.065arrow_forward
- Structural Analysis (10th Edition)Civil EngineeringISBN:9780134610672Author:Russell C. HibbelerPublisher:PEARSONPrinciples of Foundation Engineering (MindTap Cou...Civil EngineeringISBN:9781337705028Author:Braja M. Das, Nagaratnam SivakuganPublisher:Cengage Learning
- Fundamentals of Structural AnalysisCivil EngineeringISBN:9780073398006Author:Kenneth M. Leet Emeritus, Chia-Ming Uang, Joel LanningPublisher:McGraw-Hill EducationTraffic and Highway EngineeringCivil EngineeringISBN:9781305156241Author:Garber, Nicholas J.Publisher:Cengage Learning