Concept explainers
How is the tool-work relationship in turning different from that in facing?
The reason of tool work relationship in turning different from the facing.
Explanation of Solution
In turning operation, the workpiece is rotated with a fixed velocity, and it is mounted on a work-holding device named as chuck. In this operation, feed is provided to the cutting tool along with parallel to the axis of the workpiece. The cutting tool used in turning is named as a single-point cutting tool.
While in facing, the workpiece is the same rotated on the work holding device, but here the tool used is facing tool, and its movement along the workpiece is perpendicular to the workpiece. The facing tool, which is wider than the depth of cut, is only used for end facing operation.
Want to see more full solutions like this?
Chapter 23 Solutions
Degarmo's Materials And Processes In Manufacturing
Additional Engineering Textbook Solutions
INTERNATIONAL EDITION---Engineering Mechanics: Statics, 14th edition (SI unit)
Fox and McDonald's Introduction to Fluid Mechanics
Automotive Technology: Principles, Diagnosis, and Service (5th Edition)
Engineering Mechanics: Statics
Manufacturing Engineering & Technology
Introduction To Finite Element Analysis And Design
- In a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75 mm/rev is used in the operation. If cutting speed-9 m/s, the tool must be changed every 4 workparts; But if cutting speed=5 m/s, the tool can be used to produce 50 pieces between tool changes. Determine the Taylor tool life equation for this job. (use the equations given below for solution) L Tm- 1,= Nf N AD, vT" = C %3| AD,L Tm fvarrow_forwardExplain any one of the turning operations in terms of tool shape,tool path, final and generated geometry, possible tolerances. Then list possible applications or products that are made using that operation.arrow_forwardIn addition to cutting speed, what other cutting variables are included in the expanded version of the Taylor tool life equation?arrow_forward
- Q#4 In Orthogonal Cutting Model, why chip thickness after cut is greater than chip thickness before cut?arrow_forwardResearch the cutting tool alternatives which could be used for such operation. What are the parameters that could be optimized in the geometry of the cutting tool (The seven elements of tool geometry for a single point cutting tool)? What are some of the tool life criteria used in production machining operations?arrow_forward1. In a production turning operation, the cylindrical workpiece is 425 mm long and 190 mm in diameter, Feed 0.30 mm/rev. What cutting speed must be used to achieve a machining time of 7.0 min?arrow_forward
- Three tool materials are to be compared for the same finish turning operation on a batch of 100 steel parts: high speed steel, cemented carbide, and ceramic. For the high speed steel tool, the 170 Taylor equation parameters are: n = 0.125 and C = 70. The price of the HSS tool is $15.00 and it is estimated that it can be ground and reground 15 times at a cost of $1.50. Tool change time = 3 min. Both carbide and ceramic tools are in insert form and can be held in the same mechanical toolholder. The Taylor equation parameters for the cemented carbide are: n = 0.25 and C = 500; and for the ceramic: n = 0.6 and C = 3,000. The cost per insert for the carbide = $6.00 and for the ceramic = $8.00. Number of cutting edges per insert in both cases = 6. Tool change time = 1.0 min for both tools. Time to change parts = 2.0 min. Feed = 0.25 mm/rev, and depth = 3.0 mm. The cost of machine time = $30/hr. The part dimensions are: diameter = 56.0 mm and length = 290 mm. Setup time for the batch is 2.0…arrow_forward0. In a single point turning operation with a cemented carbide and steel combination having a Taylor exponent of 0.25, if the cutting speed is halved, then tool life will becomearrow_forwardIn a cutting test with 0.3 mm flank wear as tool failure criterion, a tool life of 10 min was obtained at a cutting velocity of 20 m/min. Taking tool life exponent as 0.25, the tool life in minutes at 40 m/min of cutting velocity will be?arrow_forward
- For pocket operation of 2 x 3 inch surface and dept of 0.06 in using 0.5 in end mill tool. What is the time required to finished a cut when the depth of cut is 0.3 inch and the feed rate 0.05 inch/rev, spindle RPM is 60. The subject is Machine Shop Theory. Please make clear the solution and answer and understandable. Thanksarrow_forwardProblem 2. (Determining Cutting Speeds in Machining Economics) A turning operation is performed with HSS tooling on mild steel, with Taylor tool life parameters n = 0.12, C = 60 m/min. Work part length = 450 mm and diameter = 80 mm. Feed = 0.20 mm/rev. Handling time per piece = 4.0 min, and tool change time = 1.5 min. Cost of machine and operator = $27/hr, and tooling cost = $2 per cutting edge. Find the a. cutting speed for maximum production rate and b. cutting speed for minimum cost Problem 3. (Production Rate and Cost in Machining Economics) For the two cutting speeds computed in problem 2, determine: the hourly production rate and a. b. the cost per piece.arrow_forwardQuestion 3. Three tool materials are to be compared for the same finish turning operation on a batch of 100 steel parts: high speed steel, cemented carbide, and ceramic. For the high speed steel tool, the 170 Taylor equation parameters are: n= 0.125 and C= 70. The price of the HSS tool is $15.00 and it is estimated that it can be ground and reground 15 times at a cost of $1.50. Tool change time = 3 min. Both carbide and ceramic tools are in insert form and can be held in the same mechanical toolholder. The Taylor equation parameters for the cemented carbide are: n = 0.25 and C = 500; and for the ceramic: n = 0.6 and C = 3,000. The cost per insert for the carbide = $6.00 and for the ceramic = $8.00. Number of cutting edges per insert in both cases = 6. Tool change time = 1.0 min for both tools. Time to change parts = 2.0 min. Feed = 0.25 mm/rev, and depth = 3.0 mm. The cost of machine time = $30/hr. The part dimensions are: diameter = 56.0 mm and length = 290 mm. Setup time for the…arrow_forward
- Precision Machining Technology (MindTap Course Li...Mechanical EngineeringISBN:9781285444543Author:Peter J. Hoffman, Eric S. Hopewell, Brian JanesPublisher:Cengage Learning