Concept explainers
Happy Colors manufactures crayons in a three-step process: mixing, molding, and packaging. The Mixing Department combines the direct materials of paraffin wax and pigments. The heated mixture is pumped to the Molding Department, where it is poured into molds. After the molds cool, the crayons are removed from the molds and are transferred to the Packaging Department, where paper wrappers are added and the crayons are boxed.
In the Mixing Department, the direct materials are added at the beginning of the process and the conversion costs are incurred evenly throughout the process. Work in process of the Mixing Department on April 1, 2018, consisted of 300 batches of crayons that were 30% of the way through the production process. The beginning balance in Work-in-Process Inventory—Mixing was $27,800, which consisted of $10,700 in direct materials costs and $17,100 in conversion costs. During April, 3,200 batches were started in production. The Mixing Department transferred 2,800 batches to the Molding Department in April, and 700 were still in process on April 30. This ending inventory was 80% of the way through the mixing process. Happy Colors uses FIFO process costing.
At April 30, before recording the transfer of costs from the Mixing Department to the Molding Department, the Happy Colors general ledger included the following account:
Work-in-Process Inventory—Mixing
Requirements
- 1. Prepare a production cost report for the Mixing Department for April. Round equivalent unit costs to four decimal places. Round all other costs to the nearest dollar.
- 2. Journalize all transactions affecting the Mixing Department during April, including the entries that have already been posted. Assume the labor costs are accrued and not yet paid.
Want to see the full answer?
Check out a sample textbook solutionChapter 18 Solutions
Horngren's Financial & Managerial Accounting, The Managerial Chapters (6th Edition)
Additional Business Textbook Solutions
Financial Accounting (12th Edition) (What's New in Accounting)
Horngren's Financial & Managerial Accounting, The Financial Chapters (6th Edition)
Horngren's Financial & Managerial Accounting, The Financial Chapters (Book & Access Card)
Fundamentals Of Financial Accounting
Fundamentals of Cost Accounting
Cost Accounting (15th Edition)
- Healthway uses a process-costing system to compute the unit costs of the minerals that it produces. It has three departments: Mixing, Tableting, and Bottling. In Mixing, at the beginning of the process all materials are added and the ingredients for the minerals are measured, sifted, and blended together. The mix is transferred out in gallon containers. The Tableting Department takes the powdered mix and places it in capsules. One gallon of powdered mix converts to 1,600 capsules. After the capsules are filled and polished, they are transferred to Bottling where they are placed in bottles, which are then affixed with a safety seal and a lid and labeled. Each bottle receives 50 capsules. During July, the following results are available for the first two departments (direct materials are added at the beginning in both departments): Overhead in both departments is applied as a percentage of direct labor costs. In the Mixing Department, overhead is 200 percent of direct labor. In the Tableting Department, the overhead rate is 150 percent of direct labor. Required: 1. Prepare a production report for the Mixing Department using the weighted average method. Follow the five steps outlined in the chapter. Round unit cost to three decimal places. 2. Prepare a production report for the Tableting Department. Materials are added at the beginning of the process. Follow the five steps outlined in the chapter. Round unit cost to four decimal places.arrow_forwardRich company produces a variety of stationery products. One product, sealing wax sticks,passes through two processes: blending and molding. The weighted average method is used toaccount for the cost of production. Two ingredients, paraffin and pigment are added at thebeginning of the process and heated and mixed for several hours. After blending, the resultingproduct is sent to the Molding department, where it is poured into molds and cooled. Thefollowing information relates to the blending process for November:a) Work in process, November 1, had 20,000 pounds, 20% complete with respect toconversion costs. Costs associated with partially completed units withParaffin $ 120,000Pigment $ 100,000Direct Labor $ 30,000Overhead applied $ 10,000b) Work in process, August 31, had 30,000 pounds, 70% complete with respect toconversion costs.c) Units completed and transferred out totaled 500,000 pounds. Costs added during themonth were:Paraffin $ 3,060,000Pigment $ 2,550,000Direct Labor $…arrow_forwardScribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Units Pulping Conversion 20% Work in process inventory, March 1 Work in process inventory, March 31 5,000 100% 8,000 100% 25% $4,800 $500 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during…arrow_forward
- Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Pulping 100% Units Conversion Work in process inventory, March 1 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during…arrow_forwardScribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Work in process inventory, March 1 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Units Percent Completed Pulping Conversion…arrow_forwardScribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Work in process inventory, March 1 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Complete this question by entering your…arrow_forward
- Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted average method in its process costing system. Data for March for the Drying Department follow. Work in process inventory, March 11 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Units 3,500 7,500 Percent Completed…arrow_forwardScribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Pulping 100% Conversion 80% Units 2,700 7,500 Work in process inventory, March 1 Work in process inventory, March-31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion…arrow_forwardGroFast Company manufactures a high-quality fertilizer, which is used primarily by commercial veg-etable growers. Two departments are involved in the production process. In the Mixing Department, various chemicals are entered into production. After processing, the Mixing Department transfers a chemical called Chemgro to the Finishing Department. There the product is completed, packaged, and shipped under the brand name Vegegro. Various chemicals --> Mixing Dept (Chemgro)-->Finishing Dept (Vegegro) ---> In the Mixing Department, the raw material is added at the beginning of the process. Labor and overhead are applied continuously throughout the process. All direct departmental overhead is traced to the departments, and plant overhead is allocated to the departments on the basis of direct-labor. The plant overhead rate for 20x2 is $.40 per direct-labor dollar. The following information relates to production during November 20x2 in the Mixing Department. a. Work in process,…arrow_forward
- For all Problems, assume the weighted-average method is to be used unless you are told otherwise. Preparing a production cost report, second department, with beginning WIP and transferred in costs; journal entries; FIFO method Happy Colors manufactures crayons in a three-step process: mixing, molding packaging. The Mixing Department combines the direct materials of paraffin wax and pigments. The heated mixture is pumped to the Molding Department, where it is poured into molds. After the molds cool, the crayons are removed from the molds and are transferred to the Packaging Department, where paper wrappers are added and the crayons are boxed. In the Mixing Department, the direct materials are added at the beginning of the process and the conversion costs are incurred evenly throughout the process. Work in process of the Mixing Department on April 1, 2018, consisted of 300 batches of crayons that were 30% of the way through the production process. The beginning balance in Work-in-Process…arrow_forwardFerdon Watches, Inc., makes four models of watches, Gag-Gift, Commuter, Sport, and Retirement. Ferdon manufactures the watches in four departments: Assembly, Polishing, Special Finishing, and Packaging. All four models are started in Assembly where all material is assembled. The Gag-Gift is transferred to Packaging, where it is packaged and transferred to finished goods inventory. The Commuter and Sport are assembled, then transferred to Polishing. Once the polishing process is completed, they are transferred to Packaging and then finished goods. The Retirement model is assembled and then transferred to Special Finishing, and then Packaging. When packaged, it is transferred to finished goods. Data for October are shown in the following table. Conversion costs are allocated based on the number of units processed in each department. Total Gag-Gift(5,000 units) Commuter(10,000 units) Sport(13,000 units) Retirement(2,000 units) Materials $ 321,000 $ 15,000 $ 90,000…arrow_forwardFerdon Watches, Inc., makes four models of watches, Gag-Gift, Commuter, Sport, and Retirement. Ferdon manufactures the watches in four departments: Assembly, Polishing, Special Finishing, and Packaging. All four models are started in Assembly where all material is assembled. The Gag-Gift is transferred to Packaging, where it is packaged and transferred to finished goods inventory. The Commuter and Sport are assembled, then transferred to Polishing. Once the polishing process is completed, they are transferred to Packaging and then finished goods. The Retirement model is assembled and then transferred to Special Finishing, and then Packaging. When packaged, it is transferred to finished goods. Data for October are shown in the following table. Conversion costs are allocated based on the number of units processed in each department. Materials Conversion costs: Assembly Polishing Special Finishing Packaging Total conversion costs Gag-Gift Commuter > Answer is complete but not entirely…arrow_forward
- Cornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage LearningManagerial Accounting: The Cornerstone of Busines...AccountingISBN:9781337115773Author:Maryanne M. Mowen, Don R. Hansen, Dan L. HeitgerPublisher:Cengage Learning